TWR-IND-IO Freescale Semiconductor, TWR-IND-IO Datasheet - Page 5

• Manufacturer Part Number: TWR-IND-IO
• Description: Interface Development Tools IND CTRL Tower IO
• Manufacturer: Freescale Semiconductor
• Type: Interfacer

Specifications of TWR-IND-IO

• Rohs: yes
• Product: Development Tools
• Interface Type: CAN, RS-232, RS-485, USB

TWR-IND-IO Jumper Options
The following is a list of all jumper options. The default installed jumper settings are
shown in white text within the black boxes.
Jumper
J13
J14
J15
J3
J4
J5
J6
J7
J9
LED Enable for Digital Signal Block B (3x PWM)
LED Enable for Digital Signal Block C (3x Timer)
LED Enable for Digital Signal Block A (3x PWM)
CAN1 Termination Enable
CAN2 Termination Enable
CAN Isolation Jumpers
Voltage I/O selection
USB2SER RTS/CTS
USB2SER TX/RX
Option
Setting
1-2
1-2
1-2
1-2
2-3
1-2
1-2
3-4
1-2
1-2
1-2
3-4
5-6
7-8
Provides power to the associated LEDs, remove
to isolate PWM signals or to use JP1 - JP3
Provides power to the associated LEDs, remove
to isolate PWM signals or to use JP4 - JP6
Provides power to the associated LEDs, remove
to isolate timer signals or to use JP7 - JP9
5V interface between MCU and transceivers
3.3V interface between MCU and transceivers
Provides a loopback of RTS/CTS, remove to
allow access to RTS and CTS
Connects UART0 TX to USB2SER RX.
Pin 1 - UART0 TX, Pin 2 - USB2SER RX
Connects UART0 RX to USB2SER TX.
Pin 3 - UART0 RX, Pin 4 - USB2SER TX
Enables 121 Ohm termination between CANH
and CANL
Enables 121 Ohm termination between CANH
and CANL
Connects CAN1_TX to TXD on CAN transceiver
associated with J11
Connects CAN1_RX to RXD on CAN transceiver
associated with J11
Connects CAN1_TX to TXD on CAN transceiver
associated with J12
Connects CAN1_RX to RXD on CAN transceiver
associated with J12
TOWER SYSTEM
Description
5