SCA3100-D04 DEMO Murata Electronics, SCA3100-D04 DEMO Datasheet - Page 4

• Manufacturer Part Number: SCA3100-D04 DEMO
• Description: Acceleration Sensor Development Tools SCA3100 Demo Board
• Manufacturer: Murata Electronics

Specifications of SCA3100-D04 DEMO

• Rohs: yes
• Tool Is For Evaluation Of: SCA3100-D04
• Acceleration: 2 g
• Sensing Axis: Triple Axis
• Interface Type: SPI
• Operating Voltage: 3.3 V
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Sensitivity: 900 count/g

3
4
VTI Technologies Oy
www.vti.fi
Hardware
GUI software
Figure 1. SCA8X0-21X0-31X0 demo USB interface board and SCA8X0-21X0-31X0 PWB.
The SCA8X0-21X0-31X0 DEMO KIT USB interface board (black PCB) and SCA8X0-21X0-31X0
PWB (red PWB) are shown in figure 1. The USB interface card converts the USB interface to SPI
interface of the accelerometer. SCA8x0, SCA21x0 or SCA31x0 sensor is soldered on the PWB
which is connected to interface board.
SCA8X0-21X0-31X0 DEMO KIT is controlled via USB serial port by GUI software. The software
must be installed into location that is suggested during installation procedure.
The GUI software has several different display modes depending on the installed accelerometer on
the PWB. The GUI displays and start up screens are presented below.
Doc.Nr. 8269300C
SCA8X0-21X0-31X0 DEMO KIT
User Manual
4/18