M27C4001-12F6 STMicroelectronics, M27C4001-12F6 Datasheet
M27C4001-12F6
Specifications of M27C4001-12F6
Available stocks
Related parts for M27C4001-12F6
M27C4001-12F6 Summary of contents
Page 1
... Active Current 30mA at 5MHz – Standby Current 100µA Programming voltage: 12.75V ± 0.25V Programming time: 100µs/Word Electronic signature – Manufacturer Code: 20h – Device Code: 41h Packages – ECOPACK® compliant versions M27C4001 32 1 FDIP32W ( PDIP32 (B) PLCC32 (C) TSOP32 ( ...
Page 2
... M27C4001 1 Summary description The M27C4001 Mbit EPROM offered in the two ranges UV (ultra violet erase) and OTP (one time programmable ideally suited for microprocessor systems requiring large programs and is organised as 524,288 by 8 bits. The FDIP32W (window ceramic frit-seal package) has a transparent lid which allows the user to expose the chip to ultraviolet light to erase the bit pattern ...
Page 3
... Minimum DC voltage on Input or Output is –0.5V with possible undershoot to –2.0V for a period less than 20ns. Maximum DC voltage on Output is V +2V for a period less than 20ns. 12/25 Parameter (1) +0.5V with possible overshoot M27C4001 Value Unit –40 to 125 °C –50 to 125 °C –65 to 150 °C – ...
Page 4
... M27C4001 4 DC and AC parameters This section summarizes the operating and measurement conditions, and the DC and AC characteristics of the device. The parameters in the DC and AC Characteristic tables that follow are derived from tests performed under the Measurement Conditions summarized in the relevant tables. Designers should check that the operating conditions in their circuit match the measurement conditions when relying on the quoted parameters ...
Page 5
... Test Condition 2.1mA –400 12.75V ± 0.25V. PP and removed simultaneously or after V PP Min Max 6 12 Min Max V ± ± – 0.2V 100 = –0.3 0 0.4 2.4 V – 0. PP. (1) (2) Min Max V ± –0.3 0 0.5 CC 0.4 2.4 11.5 12.5 PP M27C4001 Unit pF pF Unit Unit ...
Page 6
... Speed obtained with High Speed AC measurement conditions. 4. Sampled only, not 100% tested. VALID tAVQV tGLQV tELQV (1) (2) Parameter Test Condition ± ± 10 and removed simultaneously or after and AC parameters VALID tAXQX tEHQZ tGHQZ AI00724B M27C4001 (3) (3) (3) -35 -45 -55 Min Max Min Max Min Max ...
Page 7
... must be applied simultaneously with or before Sampled only, not 100% tested. 16/25 (1) (2) Parameter Test Condition ± ± 10 and removed simultaneously or after V PP M27C4001 M27C4001 -70 -80/-90 -10/-12/-15 Min Max Min Max Min Max 70 80 100 70 80 100 Unit ...
Page 8
... M27C4001 Figure 9. Programming and Verify Modes AC Waveforms A0-A18 Q0- Table 11. Programming Mode AC Characteristics Symbol Alt t t AVEL QVEL VPHEL VPS t t VCHEL VCS t t ELEH EHQX QXGL OES t t GLQV GHQZ DFP t t GHAX ° 6.25V ± 0.25V must be applied simultaneously with or before ...
Page 9
... M27C4001 Max 0.225 0.055 0.180 0.177 0.022 – 0.012 1.655 – – – 0.526 – 0.710 0.161 0.098 – 11° ...
Page 10
... B = PDIP32 C = PLCC32 N = TSOP32 Temperature Range ° – °C 1. High Speed, see AC Characteristics section for further information. For a list of available options (Speed, Package, etc...) or for further information on any aspect of this device, please contact the STMicroelectronics Sales Office nearest to you. 22/25 M27C4001 - M27C4001 1 ...