SDED5-002G-NCY SanDisk, SDED5-002G-NCY Datasheet - Page 49

• Manufacturer Part Number: SDED5-002G-NCY
• Description: IC MDOC H3 2GB FBGA
• Manufacturer: SanDisk

Specifications of SDED5-002G-NCY

• Format - Memory: FLASH
• Memory Type: FLASH - Nand
• Memory Size: 16G (2G x 8)
• Interface: Parallel
• Voltage - Supply: 1.65 V ~ 1.95 V
• Operating Temperature: -25°C ~ 85°C
• Package / Case: 115-FBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Speed: -

Rev. 1.3
9.
9.1
9.2
The Configuration Interface enables the designer to configure mDOC H3 to operate in different
modes.
9.3
mDOC H3 uses a NOR-like interface that can easily be connected to any microprocessor bus.
With a demux interface, it requires 16 address lines, 16 data lines and basic memory control
signals (CE#, OE#, WE#), as shown in Figure 11 below. Typically, mDOC H3 can be mapped to
any free 128KB memory space (8KB address space requires less address lines).
49
• A typical RISC processor memory architecture may include the following devices:
• The ID0 signal is used in a cascaded configuration.
• The LOCK# signal is used for hardware write/read protection
D
General Guidelines
• mDOC H3: Contains the OS image, applications, registry entries, back-up data, user
•
• ARM-based CPUs
• Texas Instruments OMAP, DBB
• Intel PXAxxx family
• Infineon xGold family
• Analog Devices (ADI) digital Baseband devices
• Freescale i.MXxx Application processors and i.xx digital Baseband devices
• Zoran ER4525
• Renesas SH mobile
• EMP platforms
• Qualcomm MSMxxxx
• Boot Device: In case mDOC H3 is not used as a boot device, ROM or NOR flash that
• RAM/DRAM Memory: This memory is used for code execution.
• Other Devices: A DSP processor, for example, may be used in a RISC architecture
Configuration
Demux (Standard) Interface
ESIGN
files and data, etc. It can also be used to perform boot operation, thereby replacing the
need for a separate boot device.
CPU: mDOC H3 is compatible with all major CPUs in the mobile phone,
(DTV), Digital Still Camera (DSC), MP3, GPS and other
Electronics Applications markets, including:
contains the boot code is required for system initialization, kernel relocation, loading
the operating systems and/or other applications and files into the RAM and executing
them.
for enhanced multimedia support.
C
ONSIDERATIONS
mDOC H3 EFD Featuring Embedded TrueFFS Data Sheet
Portable Consumer
Design Considerations
Digital TV
92-DS-1205-10