EPC2TI32N Altera, EPC2TI32N Datasheet - Page 13

• Manufacturer Part Number: EPC2TI32N
• Description: IC CONFIG DEVICE 1.6MBIT 32-TQFP
• Manufacturer: Altera
• Series: EPCr

Specifications of EPC2TI32N

• Programmable Type: In System Programmable
• Memory Size: 1.6Mb
• Voltage - Supply: 3 V ~ 3.6 V, 4.5 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-TQFP, 32-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 544-1648

Chapter 4: Configuration Devices for SRAM-Based LUT Devices Data Sheet
Programming and Configuration File Support
© December 2009
Altera Corporation
Table 4–5
Table 4–5. Programming Adapters
The following steps explain how to program Altera configuration devices using the
Quartus II software and the APU:
1. Choose the Quartus II Programmer (Tools menu).
2. Load the appropriate .pof by clicking Add. The Device column displays the
3. Insert a blank configuration device into the programming adapter’s socket.
4. Turn on the Program/Configure. You can also turn on Verify to verify the contents
5. Click Start.
6. After successful programming, you can place the configuration device on the PCB
The following steps explain how to program Altera configuration devices using the
MAX+PLUS II software and the APU:
1. Open the MAX+PLUS II Programmer.
2. Load the appropriate .pof using the Select Programming File dialog box (File
3. Insert a blank configuration device into the programming adapter’s socket.
4. Click Program.
5. After successful programming, you can place the configuration device on the PCB
If you are cascading EPC1 or EPC2 devices, you must generate multiple .pof. The first
device .pof will have the same name as the project, while the second device .pof will
have the same name as the first, but with a “_1” extension (e.g., top_1.pof).
device for the current programming file.
of a programmed device against the programming data loaded from a
programming file.
to configure the FPGA device.
menu). By default, the Programmer loads the current project’s .pof. The Device
field displays the device for the current programming file.
to configure the FPGA device.
shows which programming adapter to use with each configuration device.
EPC1441
Device
EPC2
EPC1
20
20-pin J-Lead
20-pin J-Lead
32-pin TQFP
32-pin TQFP
8-pin DIP
8-pin DIP
Package
- pin J-Lead
Configuration Handbook (Complete Two-Volume Set)
PLMJ1213
PLMT1213
PLMJ1213
PLMJ1213
PLMJ1213
PLMJ1213
PLMT1064
Adapter
4–13