ICE3B0565JG Infineon Technologies, ICE3B0565JG Datasheet - Page 2

• Manufacturer Part Number: ICE3B0565JG
• Description: IC OFFLINE CTRLR SMPS OTP DSO12
• Manufacturer: Infineon Technologies
• Series: CoolSET®F3r

Specifications of ICE3B0565JG

• Output Isolation: Isolated
• Frequency Range: 58 ~ 76kHz
• Voltage - Input: 10.3 ~ 27 V
• Voltage - Output: 650V
• Power (watts): 25W
• Operating Temperature: -25°C ~ 130°C
• Package / Case: 16-SOIC (0.154", 3.90mm Width) 12 leads
• Number Of Outputs: 1
• Duty Cycle (max): 80 %
• Output Voltage: 650 V
• Output Current: 500 mA
• Mounting Style: SMD/SMT
• Switching Frequency: 74.5 KHz
• Maximum Operating Temperature: + 150 C
• Fall Time: 30 ns
• Minimum Operating Temperature: - 40 C
• Rise Time: 30 ns
• Synchronous Pin: No
• Topology: Flyback
• For Use With: EVALSF3-ICE3B0565IN - BOARD DEMO ICE3B0565 15W SMPS
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: ICE3B0565JGT; ICE3B0565JGXT; SP000077217

CoolSET™-F3
ICE3B0365JG / ICE3B0565JG
Revision History:
Previous Version:1.1
Page
3, 4, 5, 19
6,8,12,13
11
15
20,21
For questions on technology, delivery and prices please contact the Infineon Technologies Offices in Germany or
the Infineon Technologies Companies and Representatives worldwide: see our webpage at http://
www.infineon.com
CoolMOS™, CoolSET™ are trademarks of Infineon Technologies AG.
Edition 2006-11-14
Published by Infineon Technologies AG,
St.-Martin-Strasse 53,
D-81541 München
©
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as warranted charac-
teristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding
circuits, descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest Infi-
neon Technologies Office in Germany or our Infineon Technologies Representatives worldwide (see address list).
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types in
question please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express written
approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure
of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support
devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may
be endangered.
Infineon Technologies AG 1999.
Subjects (major changes since last revision)
Update to Pb-free package ( PCN 2006-092-A )
Revise typo to the trigger level in Vsofts ( C2 ) and VFB ( C6a )
Revise typo in figure 13
Add pulse drain current
Add schematic for recommended PCB layout
2006-11-14
Datasheet