ICE2B765P2 Infineon Technologies, ICE2B765P2 Datasheet - Page 3

• Manufacturer Part Number: ICE2B765P2
• Description: IC OFFLINE CTRLR SMPS CM TO220
• Manufacturer: Infineon Technologies
• Series: CoolSET®F2r

Specifications of ICE2B765P2

• Output Isolation: Isolated
• Frequency Range: 62 ~ 72kHz
• Voltage - Input: 8.5 ~ 22 V
• Voltage - Output: 650V
• Power (watts): 240W
• Operating Temperature: -40°C ~ 150°C
• Package / Case: TO-220-6 Formed Leads
• For Use With: EVALSF2-ICE2B765PIN - BOARD DEMO ICE2B765P 80W SMPSEVALSF2-ICE2A0565Z-12IN - BOARD DEMO ICE2A0565Z 10W SMPS
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: ICE2B765P2X; ICE2B765P2XK; SP000014701

Off-Line SMPS Current Mode Controller
with integrated 650V/800V CoolMOS™
Product Highlights
• Best in class in DIP8, DIP7, TO220 and DSO16/12
• No heat-sink required for DIP8, DIP7 and DSO16/12
• Increased creepage distance for TO220, DIP7 and
• Isolated drain for TO220 packages
• Lowest standby power dissipation
• Enhanced protection functions with
• Pb-free lead plating for all packages; RoHS compliant
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Version 2.6
packages
DSO16/12
Auto Restart Mode
650V/800V avalanche rugged CoolMOS™
Only few external components required
Input Vcc Undervoltage Lockout
67kHz/100kHz switching frequency
Max duty cycle 72%
Low Power Standby Mode to meet
European Commission Requirements
Thermal Shut Down with Auto Restart
Overload and Open Loop Protection
Overvoltage Protection during Auto Restart
Adjustable Peak Current Limitation via
external resistor
Overall tolerance of Current Limiting < ±5%
Internal Leading Edge Blanking
User defined Soft Start
Soft driving for low EMI
C
Feedback
85 ... 270 VAC
Soft Start
SoftS
FB
CoolSET™-F2
PWM-Controller
Soft-Start Control
Low Power
StandBy
Management
Protection Unit
VCC
Power
Typical Application
Peak Current Limitation
Precise Low Tolerance
R
Start-up
PW M Controller
Current Mode
C
VCC
Description
The second generation CoolSET™-F2 provides several
special enhancements to satisfy the needs for low power
standby and protection features. In standby mode
frequency reduction is used to lower the power
consumption and support a stable output voltage in this
mode. The frequency reduction is limited to 20kHz/21.5
kHz to avoid audible noise. In case of failure modes like
open loop, overvoltage or overload due to short circuit the
device switches in Auto Restart Mode which is controlled by
the internal protection unit. By means of the internal precise
peak current limitation, the dimension of the transformer
and the secondary diode can be sized lower which leads to
more cost effective for the overall system.
3
CoolMOS™
Drain
Snubber
Isense
GND
R
Sense
CoolSET™-F2
PG-TO220-6-46
P-TO220-6-46
Feedback
P-DIP-7-1
PG-DSO-16/12
P-DIP-8-4, -6
PG-DIP-7-1
PG-DIP-8-6
PG-TO220-6-47
25 Dec 2006
P-TO220-6-47
DC Output
Converter
+
-