BTS840S2 Infineon Technologies, BTS840S2 Datasheet - Page 15

• Manufacturer Part Number: BTS840S2
• Description: IC SWITCH PWR HISIDE 2CH DSO-20
• Manufacturer: Infineon Technologies
• Series: PROFET®r
• Type: High Sider

Specifications of BTS840S2

• Input Type: Non-Inverting
• Number Of Outputs: 2
• On-state Resistance: 27 mOhm
• Current - Output / Channel: 12A
• Current - Peak Output: 50A
• Voltage - Supply: 5 V ~ 34 V
• Operating Temperature: -40°C ~ 150°C
• Mounting Type: Surface Mount
• Package / Case: DSO-20
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: BTS840S2; BTS840S2INTR; BTS840S2NT; BTS840S2T; SP000011324

Package and Ordering Code
Standard: P-DSO-20-12 (Power SO 20)
All dimensions in millimetres
Infineon technologies
Ordering Code
Sales Code
Q67060-S7013
BTS 840
15
Published by
Infineon Technologies AG,
St.-Martin-Strasse 53,
D-81669 München
© Infineon Technologies AG 2001
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and
shall not be considered as a guarantee of characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited
to warranties of non-infringement, regarding circuits, descriptions
and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions
and prices please contact your nearest Infineon Technologies Office
in Germany or our Infineon Technologies Representatives worldwide
(see address list).
Warnings
Due to technical requirements components may contain dangerous
substances. For information on the types in question please contact
your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support
devices or systems with the express written approval of Infineon
Technologies, if a failure of such components can reasonably be
expected to cause the failure of that life-support device or system, or
to affect the safety or effectiveness of that device or system. Life
support devices or systems are intended to be implanted in the
human body, or to support and/or maintain and sustain and/or
protect human life. If they fail, it is reasonable to assume that the
health of the user or other persons may be endangered.
BTS 840 S2
2003-Oct-01