BTS5242-2L Infineon Technologies, BTS5242-2L Datasheet - Page 9

• Manufacturer Part Number: BTS5242-2L
• Description: IC PWR SWITCH HISIDE PG-DSO-12-9
• Manufacturer: Infineon Technologies
• Series: PROFET®r
• Type: High Sider

Specifications of BTS5242-2L

• Package / Case: DSO-12
• Input Type: Non-Inverting
• Number Of Outputs: 2
• On-state Resistance: 19 mOhm
• Current - Output / Channel: 6A
• Current - Peak Output: 50A
• Voltage - Supply: 4.5 V ~ 28 V
• Operating Temperature: -40°C ~ 150°C
• Mounting Type: Surface Mount
• On Resistance (max): 0.019 Ohms
• Maximum Operating Temperature: + 150 C
• Minimum Operating Temperature: - 40 C
• Maximum Power Dissipation: 1400 mW
• Mounting Style: SMD/SMT
• Supply Current: 3.2 mA
• Power Load Switch Type: High Side
• Input Voltage: 28V
• Current Limit: 40A
• On State Resistance: 0.019ohm
• Thermal Protection: ESD
• Power Dissipation Pd: 1.4W
• No. Of Outputs: 2
• Internal Switch: No
• Rohs Compliant: Yes
• Distribution Switch Case Style: SOIC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: BTS5242-2LINTR; BTS52422LXT; SP000281082

T
Pos.
ESD Susceptibility
4.1.17 ESD susceptibility HBM
1) R and L describe the complete circuit impedance including line, contact and generator impedances
2) Load Dump is specified in ISO 7637, R
3) Current limitation is a protection feature. Operation in current limitation is considered as “outside” normal operating range.
4) Pulse shape represents inductive switch off: I
5) Device mounted on PCB (50 mm x 50 mm x 1.5 mm epoxy, FR4) with 6 cm
Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
Note: Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
Data Sheet
j
= 25 C (unless otherwise specified)
Protection features are not designed for continuous repetitive operation.
thick) for V
maximum rating conditions for extended periods may affect device reliability.
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are
not designed for continuous repetitive operation.
Parameter
bb
connection. PCB is vertical without blown air.
I
is the internal resistance of the Load Dump pulse generator
L
(t) = I
L
(0) * (1 - t
IN, CLA
OUT
9
IS
/
Symbol
V
t
peak
ESD
); 0 < t < t
2
Limit Values Unit Test Conditions
min.
peak.
Smart High-Side Power Switch
copper heatsinking area (one layer, 70 µm
-1
-2
-4
Please see
max.
1
2
4
Electrical Characteristics
kV
Figure 8
Rev.1.2, 2008-09-01
according to
EIA/JESD 22-A
114B
BTS5242-2L