PS2932-1-F3-A CEL, PS2932-1-F3-A Datasheet - Page 9
![no-image](/images/manufacturer_photos/0/1/129/cel_sml.jpg)
PS2932-1-F3-A
Manufacturer Part Number
PS2932-1-F3-A
Description
PHOTOCOUPLER 1CH TRANS OUT SM
Manufacturer
CEL
Series
NEPOCr
Datasheet
1.PS2933-1-F3-A.pdf
(13 pages)
Specifications of PS2932-1-F3-A
Number Of Channels
1
Input Type
DC
Voltage - Isolation
2500Vrms
Current Transfer Ratio (min)
400% @ 1mA
Current Transfer Ratio (max)
4500% @ 1mA
Voltage - Output
300V
Current - Output / Channel
60mA
Current - Dc Forward (if)
50mA
Vce Saturation (max)
1V
Output Type
Darlington
Mounting Type
Surface Mount
Package / Case
4-SMD
Isolation Voltage
2500 Vrms
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
PS2932-1ATR
<R>
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
(2) Wave soldering
(3) Soldering by soldering iron
• Peak reflow temperature
• Time of peak reflow temperature
• Time of temperature higher than 220°C
• Time to preheat temperature from 120 to 180°C
• Number of reflows
• Flux
• Temperature
• Time
• Preheating conditions
• Number of times
• Flux
• Peak temperature (lead part temperature)
• Time (each pins)
• Flux
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100°C.
260°C or below (molten solder temperature)
10 seconds or less
120°C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
120˚C
(preheating)
120±30 s
Data Sheet PN10050EJ02V0DS
350°C or below
3 seconds or less
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
180˚C
260°C or below (package surface temperature)
10 seconds or less
60 seconds or less
120±30 s
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Time (s)
(heating)
to 60 s
to 10 s
260˚C MAX.
220˚C
PS2932-1,PS2933-1
9