PVC6E104C01B00 Murata Electronics North America, PVC6E104C01B00 Datasheet - Page 27
![TRIM POT 100KOHM 1 TURN SIDE ADJ](/photos/8/48/84839/pvc6e_series_sml.jpg)
PVC6E104C01B00
Manufacturer Part Number
PVC6E104C01B00
Description
TRIM POT 100KOHM 1 TURN SIDE ADJ
Manufacturer
Murata Electronics North America
Series
PVC6r
Datasheet
1.PVZ3A503A01R00.pdf
(55 pages)
Specifications of PVC6E104C01B00
Resistance (ohms)
100K
Power (watts)
0.5W, 1/2W
Taper
Linear
Tolerance
±10%
Temperature Coefficient
±100ppm/°C
Number Of Turns
Single
Adjustment Type
Side Adjustment
Mounting Type
Through Hole
Resistive Material
Ceramic
Package / Case
Square - 0.272" L x 0.256" W x 0.315" H (6.90mm x 6.50mm x 8.00mm)
Resistance In Ohms
100K
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
490-2742
!Note
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
sales representatives or product engineers before ordering.
!Note
1. Use suitable screwdrivers that fit comfortably in
2. Do not apply more than 4.9N (Ref. 500gf) of twist
1. Please make sure that your product has been
2. Murata cannot guarantee trimmer potentiometer
Notice (Handling)
driver slot. We recommend the screwdriver below.
* Recommended screwdriver for manual adjustment
We can supply the screwdrivers above.
If you place order, please specify the Murata P/N.
and stress after mounting onto PCB to prevent
contact intermittence. If excessive force is
applied, the trimmer potentiometer may not
function.
Notice (Other)
evaluated and confirmed against your
specifications when our product is mounted to your
product.
integrity when used under conditions other than
those specified in this document.
VESSEL MFG.: NO. 9000-2.6x30
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
(Murata P/N: KMDR120)
3. Please use within the effective rotational angle.
4. When using a lock paint to fix slot position,
The potentiometer does not have a mechanical stop
for over rotation. In cases out of effective
rotational angle, the trimmer potentiometer may
not function.
please use adhesive resin without chlorine or
sulfur (Three-bond "1401 series") and evaluate
performance with your product. Lock paint may cause
corrosion or electrical contact problems.
PVM4 Series Notice
R50E.pdf
25
11.1.17
4