ATA006A0X4 Lineage Power, ATA006A0X4 Datasheet - Page 11
![no-image](/images/manufacturer_photos/0/3/387/lineage_power_sml.jpg)
ATA006A0X4
Manufacturer Part Number
ATA006A0X4
Description
CONVERT DC/DC 0.75 5.5V @ 6A SIP
Manufacturer
Lineage Power
Series
Austin MicroLynx™ IIr
Type
Point of Load (POL) Non-Isolated with Remote On/Offr
Datasheet
1.ATA006A0XZ.pdf
(19 pages)
Specifications of ATA006A0X4
Rohs Status
RoHS non-compliant
Output
0.75 ~ 5.5V
Number Of Outputs
1
Power (watts)
33W
Mounting Type
Through Hole
Voltage - Input
8.3 ~ 14V
Package / Case
6-SIP Module
1st Output
0.75 ~ 5.5 VDC @ 6A
Size / Dimension
1.00" L x 0.26" W x 0.50" H (25.4mm x 6.7mm x 12.7mm)
Power (watts) - Rated
33W
Operating Temperature
-40°C ~ 85°C
Efficiency
89%
Approvals
CSA, EN, UL, VDE
3rd Output
-
2nd Output
-
Other names
555-1023
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
ATA006A0X4-SR
Manufacturer:
PULSE
Quantity:
643
Part Number:
ATA006A0X4-SR
Manufacturer:
TYCO
Quantity:
20 000
Part Number:
ATA006A0X4Z
Manufacturer:
GE
Quantity:
20 000
Data Sheet
January 18, 2010
Design Considerations
Output Filtering
The Austin MicroLynx
designed for low output ripple voltage and will meet
the maximum output ripple specification with 1 µF
ceramic and 10 µF polymer capacitors at the output of
the module. However, additional output filtering may
be required by the system designer for a number of
reasons. First, there may be a need to further reduce
the output ripple and noise of the module. Second,
the dynamic response characteristics may need to be
customized to a particular load step change.
To reduce the output ripple and improve the dynamic
response to a step load change, additional
capacitance at the output can be used. Low ESR
polymer and ceramic capacitors are recommended to
improve the dynamic response of the module. For
stable operation of the module, limit the capacitance
to less than the maximum output capacitance as
specified in the electrical specification table.
LINEAGE
POWER
TM
II 12V SIP module is
(continued)
8.3 – 14Vdc input; 0.75Vdc to 5.5Vdc Output; 6A output current
Austin MicroLynx II
Safety Considerations
For safety agency approval the power module must
be installed in compliance with the spacing and
separation requirements of the end-use safety agency
standards, i.e., UL 60950-1, CSA C22.2 No. 60950-1-
03, and VDE 0850:2001-12 (EN60950-1) Licensed.
For the converter output to be considered meeting the
requirements of safety extra-low voltage (SELV), the
input must meet SELV requirements. The power
module has extra-low voltage (ELV) outputs when all
inputs are ELV.
The input to these units is to be provided with a fast-
acting fuse with a maximum rating of 6A in the
positive input lead
TM
12V SIP Non-isolated Power Modules:
.
11