Z8F64220100ZDA Zilog, Z8F64220100ZDA Datasheet - Page 110
Manufacturer Part Number
ADAPTER ICE Z8 ENCORE 64K 64LQFP
Specifications of Z8F64220100ZDA
For Use With/related Products
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Table 48. Watchdog Timer Control Register (WDTCTL)
Watchdog Timer Control Register Definitions
Watchdog Timer Control Register
3. Write the Watchdog Timer Reload Upper Byte register (WDTU).
4. Write the Watchdog Timer Reload High Byte register (WDTH).
5. Write the Watchdog Timer Reload Low Byte register (WDTL).
All steps of the Watchdog Timer Reload Unlock sequence must be written in the order just
listed. There must be no other register writes between each of these operations. If a regis-
ter write occurs, the lock state machine resets and no further writes can occur, unless the
sequence is restarted. The value in the Watchdog Timer Reload registers is loaded into the
counter when the Watchdog Timer is first enabled and every time a WDT instruction is
The Watchdog Timer Control (WDTCTL) register
indicates the source of the most recent Reset event, indicates a Stop Mode Recovery event,
and indicates a Watchdog Timer time-out. Reading this register resets the upper four bits
ter address unlocks the three Watchdog Timer Reload Byte registers (WDTU, WDTH, and
WDTL) to allow changes to the time-out period. These write operations to the WDTCTL
register address produce no effect on the bits in the WDTCTL register. The locking mech-
anism prevents spurious writes to the Reload registers.
See descriptions below
to the Watchdog Timer Control register (WDTCTL).
unlock sequence to the Watchdog Timer Control (WDTCTL) regis-
Z8 Encore! XP
48) is a Read-Only register that