PA32-32 Logical Systems Inc., PA32-32 Datasheet

PA32-32

Manufacturer Part Number

PA32-32

Description

ADAPTER 32-PLCC AE TO 32-DIP

Manufacturer

Logical Systems Inc.

Datasheet

1.PA32-32Z.pdf (1 pages)

Specifications of PA32-32

Module/board Type

Socket Module - PLCC

For Use With/related Products

32 pin PLCC Devices

Lead Free Status / RoHS Status

Contains lead / RoHS non-compliant

Other names

309-1091
PA3232

Current page: 1 of 1
Download datasheet (26Kb)

Supported Device/Footprints

This adapter allows programming of many 32 pin PLCC, CLCC

and LCC devices in their 32 pin DIP footprint.

The CLCC package has J leads. The LCC package is leadless.

Both packages are ceramic. The LCC package is supported by

the PA32-32Z when a shim is used. See the LCC Package

Support section.

The following devices are supported using the indicated footprint.

Generic: 27x010, 27x020, 27x040, 27x080, 27x101, 27x201,

27x401, 29F100

Footprint: Same device 32DIP 0.6”

Adapter Dimensions

S Y

T E M S

Logical Systems Corporation

PO Box 6184, Syracuse, NY 13217-6184 USA

Tel (315) 478-0722, FAX (315) 479-6753

www.logicalsys.com, Email: info@logicalsys.com

PA32-32Z

PA32-32

32 pin PLCC socket/32 pin DIP 0.6” plug

PA32-32(Z) Data Sheet

Adapter Construction

The adapter is made up of 2 sub-assemblies. They assemble via

connectors making the adapter modular. This way the sub-

assemblies can be replaced when they wear out.

When disassembling the adapter take care not to bend the pins.

When reassembling the adapter note the pin 1 indicators to align

the parts correctly.

The following chart shows the various socket and board part

numbers that make up these adapters.

Test Sockets

Adapter Wiring

This adapter is wired 1 to 1. The following chart shows the

connections from the PLCC device to the adapters DIP plug.

LCC (Leadless) package support

The test socket on the PA32-32Z can accommodate the LCC

package. A shim must be used to make up the difference in

thickness between the PLCC and LCC packages. The shim can

be ordered using part number SHIM32-453 or it can be made.

The shim should be between 0.023” and 0.030” thick and cut to

a size of 3/8” by 5/8”. It should be affixed to the inside of the

cover of the socket. Test close the socket, without a device, to

confirm the shim does not interfere with the interlocking parts of

the socket.

LSC #

32-309

32-453

PA32-32

PA32-32Z

DEVICE

Adapter

Style

Auto-Eject

Lidded ZIF

PLUG

Socket

32-309

32-453

Mfgr/Pn

Yamaichi IC120-0324-309

Yamaichi IC51-0324-453

PLUG

PA32-32Z Ver C

PA32-32 Ver D

PA32-32(Z) Data Sheet

Board

Doc: 32-32ZR.DOC

DEVICE

Rev 7/12/99

Page 1 of 1

Related parts for PA32-32

Related keywords

pa32-32z
PA32-32 datasheet
PA32-32 data sheet
PA32-32 pdf datasheet
PA32-32 component
PA32-32 part
PA32-32 distributor
PA32-32 RoHS
PA32-32 datasheet download