C8051T600QDB Silicon Laboratories Inc, C8051T600QDB Datasheet - Page 95

• Manufacturer Part Number: C8051T600QDB
• Description: BOARD SOCKET DAUGHTER QFN
• Manufacturer: Silicon Laboratories Inc

Specifications of C8051T600QDB

• Module/board Type: Socket Module - QFN
• Data Bus Width: 8 bit
• Operating Supply Voltage: + 1.8 V to + 3.6 V
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: C8051T600DK
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1406

19.7. EPROM Error Reset
If an EPROM read or write targets an illegal address, a system reset is generated. This may occur due to
any of the following:



The MEMERR bit (RSTSRC.6) is set following an EPROM error reset. The state of the RST pin is unaf-
fected by this reset.
19.8. Software Reset
Software may force a reset by writing a 1 to the SWRSF bit (RSTSRC.4). The SWRSF bit will read 1 fol-
lowing a software forced reset. The state of the RST pin is unaffected by this reset.
Programming hardware attempts to write or read an EPROM location which is above the user code
space address limit.
An EPROM read from firmware is attempted above user code space. This occurs when a MOVC
operation is attempted above the user code space address limit.
A Program read is attempted above user code space. This occurs when user code attempts to branch
to an address above the user code space address limit.
Rev. 1.2
C8051T600/1/2/3/4/5/6
95