CDB5376 Cirrus Logic Inc, CDB5376 Datasheet - Page 7

• Manufacturer Part Number: CDB5376
• Description: EVALUATION BOARD FOR CS5376
• Manufacturer: Cirrus Logic Inc

Specifications of CDB5376

• Main Purpose: Seismic Evaluation System
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: CS3301A, CS3302A, CS4373A, CS5372A, CS5376A
• Primary Attributes: Quad Digital Filter
• Secondary Attributes: Graphical User Interface, SPI™ & USB Interfaces
• Processor To Be Evaluated: CS330x, CS4373A, CS537x
• Interface Type: USB
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant
• Other names: 598-1778

1. INITIAL SETUP
1.1
The CDB5376 evaluation kit includes:
The following are required to operate CDB5376, and are not included:
1.2
To set up the CDB5376 evaluation board:
DS612DB3
• CDB5376 Evaluation Board
• USB Cable (A to B)
• Software Download Information Card
• Bipolar Power Supply with Banana Jack Outputs (+/-12 V @ 300 mA)
• Banana Jack Cables (4x)
• PC Running Windows 2000 or XP with an Available USB Port
• Internet Access to Download the Evaluation Software
• Set all jumpers and DIP switches to their default settings (see next sections).
• With power off, connect the CDB5376 power inputs to the power supply outputs.
• Connect the USB cable between the CDB5376 USB connector and the PC USB port.
• Proceed to the Software Setup section to install the evaluation software and USB driver.
Kit Contents
Hardware Setup
VA- = -12 V
VA+ = +12 V
GND = 0 V
VD = +12 V
CDB5376
7