CP2201EK Silicon Laboratories Inc, CP2201EK Datasheet - Page 67

• Manufacturer Part Number: CP2201EK
• Description: KIT EVAL FOR CP2201 ETH CTRLR
• Manufacturer: Silicon Laboratories Inc
• Type: Controllers & Processorsr

Specifications of CP2201EK

• Main Purpose: Interface, Ethernet Sensor
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: CP2200, CP2201
• Primary Attributes: Temperature and Light Sensor
• Secondary Attributes: Graphic User Interface
• Interface Type: Ethernet
• Product: Modules
• Silicon Manufacturer: Silicon Labs
• Silicon Core Number: CP2201
• Silicon Family Name: CP220x
• Kit Contents: CP2201 Evaluation Board, Power Adapter, CAT5e Ethernet Cable, CD-ROM, Quick-Start Guide
• For Use With/related Products: CP2201
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant
• Other names: 336-1316

The Receive FIFO Full interrupt will be generated once all free space in the buffer is used or all TLB slots are filled.
The host processor should read the RXFIFOSTA register to determine the cause of the interrupt. To receive
additional packets after the buffer is filled, packets must be removed from the buffer by reading them out or
discarding them. Packets can be discarded one at a time or all at once by writing ‘1’ to RXCLEAR (RXCN.0).
12.7. Receive Buffer Advanced Status and Control Registers
The receive buffer is controlled and managed through the registers in Table 17. These registers are not commonly
accessed by the host processor except for debug purposes.
CPTLB
TLBVALID
TLBnINFOH
TLBnINFOL
TLBLENH
TLBLENL
TLBnADDRH
TLBnADDRL
RXFIFOTAILH
RXFIFOTAILL
RXFIFOHEADH
RXFIFOHEADL
RXFIFOSTA
Bits 7–3: UNUSED. Read = 00000b; Write = don’t care.
Bits 2–0: CPTLB[2:0]: Current Packet TLB Number
Register
R/W
Bit7
—
The TLB Number (0–7) of the TLB slot associated with the current packet.
R/W
Bit6
—
Current Packet TLB Number
TLB Valid Indicator
TLBn Packet Information
TLBn Packet Length
TLBn Packet Address
Receive FIFO Buffer Tail Pointer
Receive FIFO Buffer Head
Pointer
Receive FIFO Buffer Status
Table 17. Receive Status and Control Register Summary
Register 46. CPTLB: Current Packet TLB Number
R/W
Bit5
—
Long Name
R/W
Bit4
—
R/W
Bit3
—
Rev. 1.0
Address
multiple Specifies information about the packet associ-
multiple Specifies the length of the packet associated
multiple Specifies the starting address of the packet
0x1A
0x1C
0x5B
0x15
0x16
0x17
0x18
R/W
Bit2
Specifies the TLB number (0–7) associated with
the current packet.
Indicates which TLBs currently have valid pack-
ets.
ated with TLBn (n = 0–7).
with TLBn (n = 0–7).
associated with TLBn (n = 0–7).
Points to the byte following the last valid byte.
This is where new packets are added.
Points to the beginning of the current packet
and is incremented with each Auto Read.
Indicates the cause of the Receive FIFO Buffer
Full interrupt.
CPTLB
R/W
Bit1
Description
R/W
Bit0
CP2200/1
00000000
Reset Value
Address:
0x1A
67