CP2201EK Silicon Laboratories Inc, CP2201EK Datasheet - Page 93

• Manufacturer Part Number: CP2201EK
• Description: KIT EVAL FOR CP2201 ETH CTRLR
• Manufacturer: Silicon Laboratories Inc
• Type: Controllers & Processorsr

Specifications of CP2201EK

• Main Purpose: Interface, Ethernet Sensor
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: CP2200, CP2201
• Primary Attributes: Temperature and Light Sensor
• Secondary Attributes: Graphic User Interface
• Interface Type: Ethernet
• Product: Modules
• Silicon Manufacturer: Silicon Labs
• Silicon Core Number: CP2201
• Silicon Family Name: CP220x
• Kit Contents: CP2201 Evaluation Board, Power Adapter, CAT5e Ethernet Cable, CD-ROM, Quick-Start Guide
• For Use With/related Products: CP2201
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant
• Other names: 336-1316

Table 22. 10BASE-T Interface DC Electrical Characteristics
V
Transmitter Differential Output Voltage (Peak)
Receiver Normal Squelch Level (Peak)
Receiver Low Squelch Level
Physical Layer Startup Time
DD
Note: The Auto-Negotiation states and error types are described in Clause 28 of IEEE 802.3.
Bit 7:
Bit 6:
Bit 5:
Bit 4:
Bit 3:
Bit 2:
Bit 1:
Bit 0:
LGCILF
= 3.1 to 3.6 V, –40 to +85 °C unless otherwise specified.
Bit7
R
LGCILF: Link Good Check Incompatible Link Failure
0: Normal operation.
1: Auto-negotiation failed due to an incompatible link.
LGCLSF: Link Good Check Line Status Failure
0: Normal operation.
1. Auto-negotiation failed due to a link fault.
AKDLF: Acknowledge Detect Link Failure
0: Normal operation.
1: Auto-negotiation failed due to lack of reception of fast link pulses.
AKDAMF: Acknowledge Detect Acknowledge Match Failure
0: Normal operation.
1: Auto-negotiation failed due to reception of a link code word with the ACK bit cleared.
AKDCMF: Acknowledge Detect Consistency Match Failure
0: Normal operation.
1: Auto-negotiation failed due to reception of inconsistent link code words.
ABDLF: Ability Detect Link Failure
0: Normal operation.
1: Auto-negotiation failed due to lack of reception of fast link pulses.
ABDAKMF: Ability Detect Acknowledge Match Failure
0: Normal operation.
1: Auto-negotiation failed due to the reception of link code word(s) with the ACK bit set.
ABDABMF: Ability Detect Ability Match Failure
0: Normal operation.
1: Auto-negotiation failed due to the lack of reception of three consecutive link code words.
LGCLSF
Bit6
Parameters
R
Register 72. PHYSTA: Physical Layer Status Register
AKDLF
Bit5
R
AKDAMF AKDCMF
Bit4
R
Conditions
Bit3
R
Rev. 1.0
ABDLF
Bit2
R
ABDAKMF ABDABMF 00000000
Min
2.2
—
—
—
Bit1
R
Typ
585
330
2.5
1
Bit0
R
CP2200/1
Max
Reset Value
2.8
—
—
—
Address:
0x80
UNITS
mV
mV
ms
V
93