STR710-EVAL STMicroelectronics, STR710-EVAL Datasheet - Page 7

• Manufacturer Part Number: STR710-EVAL
• Description: BOARD EVAL FOR STR71X SER MCU
• Manufacturer: STMicroelectronics
• Type: MCUr

Specifications of STR710-EVAL

• Contents: STR710 Evaluation Board, LCD, I2C EEPROM, 4MBytes EMI Flash and 4MBytes EMI SRAM
• Processor To Be Evaluated: STR710FZ2T6
• Data Bus Width: 32 bit
• Interface Type: RS-232, USB
• Silicon Manufacturer: ST Micro
• Core Architecture: ARM
• Core Sub-architecture: ARM7TDMI
• Silicon Core Number: STR7
• Silicon Family Name: STR71x
• Kit Contents: Evaluation Board For STR71xF
• Rohs Compliant: NA
• For Use With/related Products: STR71x ARM7 Series
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 497-4516

STR710-EVAL
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
Overview
The STR710-EVAL board is a general purpose evaluation platform with USB, CAN (controller
area network) and RS232 interfaces.
Processor
The board supports the STR710FZ2T6 ARM7TDMI
runs at a frequency of 48 MHz.
Boot modes and configuration options are set using microswitches.
Debug
Software debug is by a standard 20-pin JTAG connection. This may connect to a standard USB
to JTAG in-circuit emulator.
Prototype area
A 2.54 x 2.54 mm gridded area of 1mm holes is available for prototyping using wire wrap or
similar prototyping techniques.
Reset
The reset sources are:
●
●
●
Memory
Table 1.
Power supplies
Power to the board is supplied using a lump in cord power supply providing 5 V to the board. All
other required voltages are provided by on-board voltage regulators or voltage convertors.
USB full speed interface
USB full speed interface device supported by a type B connector. The USB clock uses a
separate 48 MHz oscillator. See
3
2
1
0
Region
power on reset,
push button reset,
JTAG reset from an in-circuit emulator.
Unused
LCD
SRAM
Flash (boot bank)
STR710-EVAL board EMI memory map
Use
Section 3.1: USB on page 13
Not applicable
Address 2 is used as the LCD
register address signal
0x6200 0000 - 0x623F FFFF
0x6000 0000 - 0x603F FFFF
Memory map used
TM
silicon - 144-pin TQFP version. This chip
.
0x6600 0000 - 0x67FF FFFF
0x6400 0000 - 0x65FF FFFF
0x6200 0000 - 0x62FF FFFF
0x6000 0000 - 0x60FF FFFF
Region space available
2 Hardware
6/27