DEMO9S08SE8 Freescale Semiconductor, DEMO9S08SE8 Datasheet - Page 5

• Manufacturer Part Number: DEMO9S08SE8
• Description: BOARD DEMO FOR SE8 FAMILY
• Manufacturer: Freescale Semiconductor
• Type: MCUr

Specifications of DEMO9S08SE8

• Contents: Board and software
• Processor To Be Evaluated: MC9S08SE8
• Data Bus Width: 8 bit
• Interface Type: RS-232, USB
• Operating Supply Voltage: 9 V
• Silicon Manufacturer: Freescale
• Core Architecture: HCS08
• Core Sub-architecture: HCS08
• Silicon Core Number: MC9S08
• Silicon Family Name: S08SE
• Kit Contents: MC9S08SE8 Board, Software, Cables, Connectors
• Rohs Compliant: Yes
• For Use With/related Products: MC9S08SE8
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Open DEMO9S08SE8
Documentation
The Getting Started DVD included with the
demo board kit contains a folder with demo
board documentation. This folder should be
copied onto your computer for use in the
next steps. This installation step is a one-time
requirement.
1. Insert provided DVD into your computer. A
2. Click “DEMO9S08SE8 Documentation,” which
3. Follow the on-screen instructions to complete
For your reference, the documentation contains:
• CodeWarrior project files
• Demo board schematics
• Demo board user’s manual
DEMO9S08SE8—Quick Start Guide
menu will appear.
is listed under the Documentation menu,
to start downloading the DEMO9S08SE8
documents.
the installation.
STEP
2
Connect Board to
Computer and Launch
the Demo Program
USB driver installation is a necessary one-time
step that requires CodeWarrior installation first.
1. Remove board from anti-static pouch.
2. Make sure the jumpers are in the default
3. Connect the provided USB cable from a
4. The operating system will recognize your board
5. Follow on-screen instructions until all USB
positions. Please refer to the LAB Tutorial to
check the default jumper positions.
free USB port on your computer to the USB
connector on the board.
as new hardware and will prompt you to install
the USB drivers. Choose the recommended
option to install the software automatically.
USB drivers for your board were pre-loaded
via CodeWarrior Development Studio 6.2
installation.
driver installations are completed. The on-
board green USB LED should illuminate.
STEP
3