R0K561622S000BE Renesas Electronics America, R0K561622S000BE Datasheet - Page 305

• Manufacturer Part Number: R0K561622S000BE
• Description: KIT STARTER FOR H8SX/1622
• Manufacturer: Renesas Electronics America
• Series: Renesas Starter Kits (RSK)r
• Type: MCUr

Specifications of R0K561622S000BE

• Contents: Board, Cables, CD, Debugger, Power Supply
• Silicon Manufacturer: Renesas
• Features: Coding And Debugging, E10A Emulator, RS232 Serial Connection
• Kit Contents: Board
• Silicon Family Name: H8SX/1622F
• Silicon Core Number: R5F61622N50LGV
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: H8SX/1622
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Bit
11
10
9
8
Bit Name
TSEIE

ESIE
DTIE
Initial
Value
0
0
0
0
R/W
R/W
R
R/W
R/W
Description
Transfer Size Error Interrupt Enable
Enables/disables a transfer size error interrupt.
When the next transfer is requested while this bit is set
to 1 and the contents of the transfer counter is less than
the size of data to be transferred at a single transfer
request, the DTE bit is cleared to 0. At this time, the
ESIF bit is set to 1 to indicate that a transfer size error
interrupt has been requested.
The sources of a transfer size error are as follows:
•
•
0: Disables a transfer size error interrupt request
1: Enables a transfer size error interrupt request
Reserved
This bit is always read as 0 and cannot be modified.
Transfer Escape Interrupt Enable
Enables/disables a transfer escape end interrupt
request. When the ESIF bit is set to 1 with this bit set to
1, a transfer escape end interrupt is requested to the
CPU or DTC. The transfer end interrupt request is
cleared by clearing this bit or the ESIF bit to 0.
0: Disables a transfer escape end interrupt
1: Enables a transfer escape end interrupt
Data Transfer Interrupt Enable
Enables/disables a transfer end interrupt request by the
transfer counter. When the DTIF bit is set to 1 with this
bit set to 1, a transfer end interrupt is requested to the
CPU or DTC. The transfer end interrupt request is
cleared by clearing this bit or the DTIF bit to 0.
0: Disables a transfer end interrupt
1: Enables a transfer end interrupt
In normal or repeat transfer mode, the total transfer
size set in DTCR is less than the data access size
In block transfer mode, the total transfer size set in
DTCR is less than the block size
Rev. 2.00 Sep. 16, 2009 Page 275 of 1036
Section 9 DMA Controller (DMAC)
REJ09B0414-0200