R0K561622S000BE Renesas Electronics America, R0K561622S000BE Datasheet - Page 755

KIT STARTER FOR H8SX/1622

R0K561622S000BE

Manufacturer Part Number
R0K561622S000BE
Description
KIT STARTER FOR H8SX/1622
Manufacturer
Renesas Electronics America
Series
Renesas Starter Kits (RSK)r
Type
MCUr
Datasheets

Specifications of R0K561622S000BE

Contents
Board, Cables, CD, Debugger, Power Supply
Silicon Manufacturer
Renesas
Features
Coding And Debugging, E10A Emulator, RS232 Serial Connection
Kit Contents
Board
Silicon Family Name
H8SX/1622F
Silicon Core Number
R5F61622N50LGV
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
For Use With/related Products
H8SX/1622
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
18.4.2
In scan mode, A/D conversion is to be performed sequentially on the analog inputs of the specified
channels up to four or eight* channels. Two types of scan mode are provided, that is, continuous
scan mode where A/D conversion is repeatedly performed and one-cycle scan mode where A/D
conversion is performed for the specified channels for one cycle.
(1)
1. When the ADST bit in ADCSR is set to 1 by software, TPU, TMR, or an external trigger
2. When A/D conversion for each channel is completed, the A/D conversion result is sequentially
3. When A/D conversion of all selected channels is completed, the ADF bit in ADCSR is set to 1.
4. The ADST bit is not cleared automatically, and steps 2 to 3 are repeated as long as the ADST
input, A/D conversion starts on the first channel in the specified channel group. Consecutive
A/D conversion on a maximum of four channels (SCANE and SCANS = B'10) or on a
maximum of eight channels (SCANE and SCANS = B'11) can be selected. When consecutive
A/D conversion is performed on four channels, A/D conversion starts on AN0 when CH3 and
CH2 = B'00, whereas starts on AN4 when CH3 and CH2 = B'01. When consecutive A/D
conversion is performed on eight channels, A/D conversion starts on AN0 when CH3 = B'0.
transferred to the corresponding ADDR of each channel.
If the ADIE bit is set to 1 at this time, an ADI interrupt request is generated. A/D conversion of
the first channel in the group starts again.
bit remains set to 1. When the ADST bit is cleared to 0, A/D conversion stops and the A/D
converter enters wait state. If the ADST bit is later set to 1, A/D conversion starts again from
the first channel in the group.
Continuous Scan Mode
Scan Mode
Rev. 2.00 Sep. 16, 2009 Page 725 of 1036
Section 18 A/D Converter
REJ09B0414-0200

Related parts for R0K561622S000BE