DK-DEV-2AGX260N Altera, DK-DEV-2AGX260N Datasheet - Page 27

• Manufacturer Part Number: DK-DEV-2AGX260N
• Description: KIT DEV FPGA 2AGX260 W/6.375G TX
• Manufacturer: Altera
• Series: Arria II GXr
• Type: FPGAr

Specifications of DK-DEV-2AGX260N

• Contents: Board, Cables, CD, DVD, Power Supply
• Silicon Manufacturer: Altera
• Core Architecture: FPGA
• Core Sub-architecture: Arria
• Silicon Core Number: EP2
• Silicon Family Name: Arria II GX
• Rohs Compliant: Yes
• For Use With/related Products: EP2AGX260
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 544-2696

Chapter 2: Board Components
Configuration, Status, and Setup Elements
Table 2–15. JTAG Chain Header Switch Component Reference and Manufacturing Information
Table 2–16. PCI Express Control DIP Switch Controls
Table 2–17. PCI Express Control DIP Switch Component Reference and Manufacturing Information
© July 2010 Altera Corporation
Board Reference
Board Reference
Switch
1
2
3
4
SW3
J9
PCIE_PRSNT2n_x1
PCIE_PRSNT2n_x4
PCIE_PRSNT2n_x8
NC
Schematic Signal Name
2x4 100 mil jumper
Four-position slide DIP switch
Table 2–15
manufacturing information.
PCI Express Control DIP Switch
The PCI Express control DIP switch (SW3) is provided to enable or disable different
configurations.
Table 2–17
manufacturing information.
Reset Configuration Push-button Switches
The load image push-button switch, RESET_CONFIGn (LOAD IMAGE) (PB5), is an
input to the MAX II CPLD EPM2210 System Controller. The push-button switch forces
a reconfiguration of the FPGA from flash memory. The location in the flash memory is
based on the LED_CONFIG_LED[2:0] setting when the button is released. Valid
settings include LED_CONFIG_LED0, LED_CONFIG_LED1, or LED_CONFIG_LED2 on
the three pages in flash memory reserved for FPGA designs.
The image select push-button switch, factory (IMAGE SEL) (PB6), toggles the
LED_CONFIG_LED[2:0] sequence. Refer to
LED_CONFIG_LED[2:0] sequence definitions.
The MAX II reset push-button switch, MAX_RESETn (PB4), resets the MAX II CPLD
EPM2210 System Controller.
Device Description
Description
lists the JTAG chain header switch component reference and
lists the PCI Express control DIP switch component reference and
Table 2–16
ON : Enable x1 presence detect
OFF : Disable x1 presence detect
ON : Enable x4 presence detect
OFF : Disable x4 presence detect
ON : Enable x8 presence detect
OFF : Disable x8 presence detect
Not used
Leamax Enterprise Co.
Manufacturer
shows the switch controls and descriptions.
Manufacturer
HCH
Arria II GX FPGA Development Board, 6G Edition Reference Manual
Description
Table 2–9
Manufacturer
Part Number
21312*4SE
Manufacturer
Part Number
HPS604-E
for the
Manufacturer Website
Manufacturer Website
www.hchtwn.com.tw
www.leamax.com
Default
OFF
ON
ON
ON
2–19