PG-FP4-E Renesas Electronics America, PG-FP4-E Datasheet - Page 19

• Manufacturer Part Number: PG-FP4-E
• Description: PROGRAMMER FLASH MEMORY UNIV
• Manufacturer: Renesas Electronics America

Specifications of PG-FP4-E

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

2.3.7
2.3.8
memories; and type B (10 pins), which is a dedicated cable for two-power-supply flash memories.
2.3.9
used.
The USB port conforms to Rev 1.1. It supports a communication speed of 12 Mbps on a USB type B connector.
Caution USB support is not available on Windows 95 and Windows NT.
The target cable is compatible with the FA adapters of Naito Densei Machida Mfg. Co., Ltd.
There are two types of target cables: type A (16 pins), which is used for both single- and two-power-supply flash
For detailed specifications of the target cable, refer to CHAPTER 7 CONNECTORS AND CABLES.
The SI and SO pins of the PG-FP4 must be shorted on the target board when the I
When using an I
USB port
Target cable
I
2
C adapter
2
C adapter, the SI and SO pins do not have to be shorted on the target board.
PG-FP4
RESET
GND
VDD
VPP
SCK
SO
CHAPTER 2 HARDWARE INSTALLATION
SI
Figure 2-5. Connection Diagram
User’s Manual U15260EJ4V0UM
Figure 2-6. I
Target board
CN2 (16 pins) Pins 3 to 5 shorted
CN1 (10 pins) Pins 3 to 5 shorted
2
C Adapter
Target device
VPP
VDD
RESET
SCL0
SDA0
GND
2
C communication mode is
17