PG-FP4-E Renesas Electronics America, PG-FP4-E Datasheet - Page 48

• Manufacturer Part Number: PG-FP4-E
• Description: PROGRAMMER FLASH MEMORY UNIV
• Manufacturer: Renesas Electronics America

Specifications of PG-FP4-E

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

4.4.2
46
(5) [Quit] menu
Clicking the [Programmer] menu displays the following pull-down menu.
This pull-down menu consists of program setting commands.
(1) [Setup Host Connection…] menu
Terminates the PG-FP4 GUI software. Clicking the X button on the right side of the task bar also terminates
the PG-FP4 GUI software.
User settings are saved in the FP4.INI file so that the GUI software will start up next time with the same
settings.
The channel for communicating between the PG-FP4 and PC can be selected and set in this dialog box.
You may select USB as the communication channel, if USB is supported on your PC.
If “Serial” is selected, the port and baud rate may be selected from the drop-down list boxes.
“Use parallel Download” can be selected in addition to the serial port. If parallel download is selected, data
download to the PG-FP4 is performed via the selected parallel interface.
Caution The parallel interface cable is not part of the PG-FP4 package.
[Programmer] menu
Check that the LPTx port is not used before using the parallel port.
USB communication is not supported on Windows 95 or Windows NT.
CHAPTER 4 PG-FP4 OPERATION USING GUI SOFTWARE
Figure 4-13. <Host Connection> Dialog Box
Figure 4-12. [Programmer] Menu
User’s Manual U15260EJ4V0UM