PG-FP4-E Renesas Electronics America, PG-FP4-E Datasheet - Page 60

• Manufacturer Part Number: PG-FP4-E
• Description: PROGRAMMER FLASH MEMORY UNIV
• Manufacturer: Renesas Electronics America

Specifications of PG-FP4-E

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

58
[Pulse number]
Displays the number of V
[Speed list box]
Select the communication rate of the selected communication channel from the following.
[IIC Address]
If I
range of input is 8 to 77H. Do not input a unit.
The slave address can be any value in the above range but must not be the same as the slave address of
another device on the I
This field cannot be accessed if the I
2
<When SIO-ch0, SIO-ch1, SIO-ch2, or SIO-H/S is selected>
<When IIC-ch0, IIC-ch1, IIC-ch2, or IIC-ch3 is selected>
<When UART-ch0, UART-ch1, UART-ch2, or UART-ch3 is selected>
<When Port-ch0, Port-ch1, or Port-ch2 is selected>
C is selected as the programming channel, input a slave address as a hexadecimal number. The valid
2.4 kHz
9.8 kHz
39 kHz
156 kHz
625 kHz
2,500 kHz
10 k baud
20 k baud
50 k baud
100 k baud
9,600 baud
19,200 baud
31,250 baud
38,400 baud
57,600 baud
76,800 baud
115,200 baud
128,000 baud
153,600 baud
100 Hz
200 Hz
300 Hz
400 Hz
500 Hz
600 Hz
800 Hz
1,000 Hz
1,200 Hz
1,500 Hz
CHAPTER 4 PG-FP4 OPERATION USING GUI SOFTWARE
2
C.
PP
or FLMD0 pulses corresponding to the selected communication mode.
2
C port is not selected.
User’s Manual U15260EJ4V0UM