PG-FP4-E Renesas Electronics America, PG-FP4-E Datasheet - Page 81

• Manufacturer Part Number: PG-FP4-E
• Description: PROGRAMMER FLASH MEMORY UNIV
• Manufacturer: Renesas Electronics America

Specifications of PG-FP4-E

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

commands without a host. This mode is useful for using the PG-FP4 on the production line during mass production
and for upgrading the version at a customer’s site.
Therefore, a new device cannot be selected for flash programming, nor can the programming parameters be changed.
Programming can be done only in the environment set last in the GUI software operation mode.
“Cancel” at the upper part of the main unit of the PG-FP4.
the message display and status LED.
item currently displayed. The Cancel button aborts the command under execution and restores the previous menu
level.
response from the PG-FP4, if any.
Next button
The PG-FP4 has a standalone mode in which the PG-FP4 itself can execute the Erase, Program, and Verify
In the standalone mode, the PG-FP4 uses the flash programming parameters stored in the internal EEPROM area.
In the standalone mode, select and execute the command menu by using the control buttons “Next”, “Enter”, and
The command menu is displayed on the message display, and the result of executing a command is indicated by
The command menu consists of two levels of menus: a main menu and sub-menu.
The Next button is used to display the next menu of the same level. The Enter button selects or executes the menu
On the main menu level, the PG-FP4 will show the menu items that can be selected.
On the sub-menu level, the first line in the message display shows the menu item and the second line shows the
Commands
Type Setting
Option Setting
Voltage Setting
Utility/Misc.
Main menu
CHAPTER 6 PG-FP4 OPERATION IN STANDALONE MODE
Figure 6-1. Menu Status Transition by Key Input
>
>
>
>
>
User’s Manual U15260EJ4V0UM
Next button
Cancel button
Enter button
Utility/Misc.
Reset FP4
..
..
Voltage Setting
Option Setting
Type Setting
Commands
Sub-menu
>
Command
execution
Enter button
79