237-00156 SofTec Microsystems SRL, 237-00156 Datasheet - Page 49

• Manufacturer Part Number: 237-00156
• Description: BOARD ISOLATION FOR ST7
• Manufacturer: SofTec Microsystems SRL
• Type: Optoisolation Boardr

Specifications of 237-00156

• Contents: *
• For Use With/related Products: STMicro ST7FMC Motor Control Device
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

5
Connectors and Functions
10. From the main menu, choose File > Open Workspace. Select the
11. Only in the case of Closed Loop control, some defines in the
12. Select the “Build” command from the “Project” menu. The project will
13. Using the DataBlaze programming utility, you can now program the
14. From the DataBlaze’s main menu, select Operations > Select Device.
15. From the DataBlaze’s main menu, select File > Load > Code Buffer.
Page 48
“AC_Metrowerks.wsp” workspace file that is located under your
working directory. Click “Open”.
“ACMParam.h” file must be edited according to the collected
parameters. The defines to be edited are listed in the following table.
be compiled and built, and an executable file will be generated.
ST7FMC microcontroller with the generated executable. To launch
DataBlaze, select Start > Programs > SofTec Microsystems >
inDART-STX > ST7 > DataBlaze Programmer.
Make sure that the “Programming Hardware” parameter is set to
“inDART-STX” and that the “Device Code” parameter specifies the
“ST7FMC2N6B” microcontroller. Click the “OK” button.
Change the “Format” parameter to “Motorola S-Rec” and browse for
Table 5.3: AC Motor Closed Loop Standalone Firmware Defines
AC Motor-Specific Defines to Be Edited
#define SAMPLING_TIME
#define PI_PROP_LOWSPD
#define PI_PROP_HIGHSPD
#define PI_INT_LOWSPD
#define PI_INT_HIGHSPD
#define PI_LOWFREQ_LIMIT
#define PI_HIGHFREQ_LIMIT
#define OPT_SLIP_LOWFREQ_LIMIT
#define OPT_SLIP_HIGHFREQ_LIMIT
#define OPT_SLIP_LOWFREQ
#define OPT_SLIP_HIGHFREQ