TQ2SL-5V Panasonic Electric Works, TQ2SL-5V Datasheet

RELAY 2A 5VDC LOW PROFILE SMD

TQ2SL-5V

Manufacturer Part Number
TQ2SL-5V
Description
RELAY 2A 5VDC LOW PROFILE SMD
Manufacturer
Panasonic Electric Works
Series
TQ-SMDr
Type
General Purpose Relayr
Datasheets

Specifications of TQ2SL-5V

Relay Type
Telecom
Circuit
DPDT (2 Form C)
Contact Rating @ Voltage
2A @ 30VDC
Coil Type
Standard
Coil Current
28.1mA
Coil Voltage
5VDC
Control On Voltage (max)
3.75 VDC
Control Off Voltage (min)
0.5 VDC
Mounting Type
Surface Mount
Termination Style
Gull Wing
Relay Construction
Non-Latching
Contact Arrangement
DPDT
Coil Voltage Dc
5V
Contact Form
2 Form C
Voltage Rating (vdc)
220V
Voltage Rating (vac)
125V
Dropout Volt (min)
0.5VDCV
Coil Resistance
178Ohm
Pick-up Voltage (max)
3.75VDC
Maximum Power Rating
60W/62.5VA
Operate Time
4ms
Contact Current Rating
2A
Contact Material
Silver Nickel/Gold Clad
Coil Suppression Diode
No
Push To Test Button
No
Led Indicator
No
Seal
Unsealed
Product Height (mm)
7.5mm
Product Depth (mm)
11.5mm
Product Length (mm)
14mm
Operating Temp Range
-40C to 85C
Pin Count
8
Mounting Style
Surface Mount
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
255-2272-5
TQ2SL-5V
TQ SMD
SPECIFICATIONS
Contact
Note:
#1 This value can change due to the switching frequency, environmental conditions,
Remarks
* Specifications will vary with foreign standards certification ratings.
*
*
*
*
*
*
*
*
Arrangement
Initial contact resistance, max.
(By voltage drop 6 V DC 1 A)
Contact material
Rating
Nominal
operating
power
Expected
life (min.
operations)
1
2
3
4
5
6
7
8
RoHS Directive compatibility information
Measurement at same location as “Initial breakdown voltage” section.
By resistive method, nominal voltage applied to the coil; contact carrying current:
2 A.
Nominal voltage applied to the coil, excluding contact bounce time.
Nominal voltage applied to the coil, excluding contact bounce time without diode.
Half-wave pulse of sine wave: 6 ms; detection time: 10 µs
Half-wave pulse of sine wave: 6 ms
Detection time: 10 µs
Refer to 6. Conditions for operation, transport and storage mentioned in
AMBIENT ENVIRONMENT .
and desired reliability level, therefore it is recommended to check this with the
actual load. (SX relays are available for low level load switching [10V DC, 10mA
max. level])
http://www.nais-e.com/
Nominal switching capacity
(resistive load)
Max. switching power
(resistive load)
Max. switching voltage
Max. switching current
Min. switching capacity
(Reference value)
Single side stable
1 coil latching
2 coil latching
Mechanical (at 180 cpm)
Electrical
(at 20 cpm)
.551
14
.354
9
2 A 30 V DC
resistive
1 A 30 V DC
resistive
0.5 A 125 V AC
resistive
.220
5.6
#1
mm
inch
140 mW (1.5 to 12 V DC)
140 mW (1.5 to 12 V DC)
70 mW (1.5 to 12 V DC)
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
220 V DC, 125 V AC
200 mW (24 V DC)
300 mW (48 V DC)
100 mW (24 V DC)
200 mW (24 V DC)
Au-clad AgNi type
10 µA 10 mV DC
0.5 A 125 V AC
60 W, 62.5 VA
FEATURES
• Low-profile: 6 mm
• Tape and reel package is available as standard packing style
• Surge withstand between contacts and coil: 2,500 V
• Breakdown voltage between contacts and coil: 1,500 V
• Capacity: 2 A
• High sensitivity:
2 A 30 V DC,
SURFACE-MOUNT RELAY
(Tape height: max. 6.5 mm
2 Form C; 140 mW power consumption (Single side stable type)
2 Form C
75 mΩ
2×10
2 A
10
10
10
8
5
5
5
LOW-PROFILE
.236 inch
Characteristics
Initial insulation resistance*
Initial
breakdown
voltage
Initial surge
voltage
Temperature rise*
Operate time [Set time]*
Release time [Reset time]*
(at 20°C)
Shock resistance
Vibration resistance
Conditions for
operation, transport
and storage*
(Not freezing and
condensing at low
temperature)
Unit weight
.256
8
inch)
Between open
contacts
Between contact sets
Between contact and
coil
Between open
contacts
(10×160 µs)
Between contacts and
coil (2×10 µs)
2
(at 20°C)
Functional*
Destructive*
Functional*
Destructive
Ambient
temperature
Humidity
3
TQ SMD RELAYS
(at 20°C)
4
1
5
7
6
at double amplitude of 3.3 mm
Min. 1,000 MΩ (at 500 V DC)
at double amplitude of 5 mm
200 m/s
294 m/s
(Detection current: 10 mA)
(Detection current: 10 mA)
(Detection current: 10 mA)
Min. 1,000 m/s
Max. 4 ms [Max. 4 ms]
Max. 4 ms [Max. 4 ms]
1,500 V (FCC Part 68)
1,000 Vrms for 1 min.
1,500 Vrms for 1 min.
1,500 Vrms for 1 min.
Min. 750 m/s
Approx. 2 g
2,500 V (Telcordia)
–40°C to +85°C*
–40°F to +185°F
5 to 85% R.H.
2
2
Max. 50°C
{20G}, 10 to 55 Hz
{30G}, 10 to 55 Hz
.071 oz
2
2
{75 G}
{100 G}
3
TESTING

Related parts for TQ2SL-5V

TQ2SL-5V Summary of contents

Page 1

... Note: #1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. (SX relays are available for low level load switching [10V DC, 10mA max. level]) Remarks * Specifications will vary with foreign standards certification ratings. ...

Page 2

ORDERING INFORMATION Contact arrangement Surface-mount availability 2: 2 Form C SA: Standard surface-mount SA: terminal type SL : High connection reliability SA: surface-mount terminal type SS: Space saving surface- SA: mount terminal type Notes: 1. Tape and reel (picked from ...

Page 3

TQ SMD DIMENSIONS SA type 14 .551 5.6 .220 2.54 .100 0.2 0.5 .008 .020 SL type 14 .551 Max. 7.5 .295 2.54 .100 0.5 .020 SS type 14 .551 Max. 7.5 .295 2.54 .100 0.5 .020 General tolerance: ±0.3 ...

Page 4

Change of contact resistance (mounting by IRS method) 100 Max Min IRS No. of operations, × Distribution of ...

Page 5

... TQ-SMD relays (10.1 Tape coming out direction ±.004 .398 Note) *SS type All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd. 13.-(3) Influence of adjacent mounting Tested sample: TQ2SA-12V, 6 pcs. 10 ...

Related keywords