MAX5361 MAXIM [Maxim Integrated Products], MAX5361 Datasheet

no-image

MAX5361

Manufacturer Part Number
MAX5361
Description
Low-Cost, Low-Power 6-Bit DACs with 2-Wire Serial Interface in SOT23 Package
Manufacturer
MAXIM [Maxim Integrated Products]
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
MAX5361MEUK+
Manufacturer:
Maxim
Quantity:
900
Part Number:
MAX5361MEUK+T
Manufacturer:
Maxim
Quantity:
5 000
The MAX5360/MAX5361/MAX5362 are low-cost, 6-bit
digital-to-analog converters (DACs) in miniature 5-pin
SOT23 packages with a simple 2-wire serial interface
that allows communication with multiple devices. The
MAX5360 has an internal +2V reference and operates
from a +2.7V to +3.6V supply. The MAX5361 has an
internal +4V reference and operates from a +4.5V to
+5.5V supply. The MAX5362 operates over the full
+2.7V to +5.5V supply range and has an internal refer-
ence equal to 0.9
The fast-mode I
communication at data rates up to 400kbps, minimizing
board space and reducing interconnect complexity in
many applications. Each device is available with one of
four factory-preset addresses (see Selector Guide ).
The MAX5360/MAX5361/MAX5362 also include an out-
put buffer, a low-power shutdown mode, and a power-
on reset that ensures the DAC outputs are at zero when
power is initially applied. In shutdown mode, the supply
current is reduced to less than 1µA and the output is
pulled down with a 10kΩ resistor to GND.
The MAX5360/MAX5361/MAX5362 are available in
miniature 5-pin SOT23 packages.
19-1785; Rev 2; 3/11
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
Automatic Tuning (VCO)
Power Amplifier Bias Control
Programmable Threshold Levels
Automatic Gain Control
Automatic Offset Adjustment
+2.7V TO +5.5V
GND
μC
PX.0/SDA
PX.1/SCL
V
DD
2-Wire Serial Interface in SOT23 Package
Typical Operating Circuit
2
C-compatible serial interface allows
________________________________________________________________ Maxim Integrated Products

V
DD
General Description
.
Low-Cost, Low-Power 6-Bit DACs with
SDA
SCL
MAX5362
Applications
GND
V
DD
OUT
o 6-Bit Accuracy in a Tiny 5-Pin SOT23 Package
o Wide +2.7V to +5.5V Supply Range (MAX5362)
o 1µA Shutdown Mode
o Buffered Output Drives Resistive Loads
o Low Glitch Power-On-Reset to Zero DAC Output
o Fast I
o ≤-5% Full-Scale Error (MAX5362)
o ≤1LSB (max) INL/DNL
o Low 230µA max Supply Current
*See Selector Guide for address options.
+ Denotes a lead(Pb)-free/RoHS-compliant package.
MAX5360_EUK_ +T*
MAX5361_EUK_ +T*
MAX5362_EUK_ +T*
MAX5360LEUK
MAX5360MEUK
MAX5360NEUK
MAX5360PEUK
MAX5361LEUK
MAX5361MEUK
MAX5361NEUK
MAX5361PEUK
MAX5362LEUK
MAX5362MEUK
MAX5362NEUK
MAX5362PEUK
PART
TOP VIEW
PART
2
C-Compatible Serial Interface
ADDRESS
GND
OUT
V
DD
0x60
0x62
0x64
0x66
0x60
0x62
0x64
0x66
0x60
0x62
0x64
0x66
Ordering Information
1
2
3
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
TEMP RANGE
SOT23-5
MAX5360
MAX5361
MAX5362
Pin Configuration
REFERENCE
Selector Guide
0.9 x V
0.9 x V
0.9 x V
0.9 x V
+2.0V
+2.0V
+2.0V
+2.0V
+4.0V
+4.0V
+4.0V
+4.0V
5
4
SCL
SDA
DD
DD
DD
DD
PIN-PACKAGE
Features
5 S OT23- 5
5 S OT23- 5
5 S OT23- 5
MARK
ADMM
ADMO
ADMQ
ADMW
ADMU
ADNG
ADMY
ADNE
ADNA
ADNC
ADMS
ADNI
TOP
1

Related parts for MAX5361

MAX5361 Summary of contents

Page 1

... SOT23 packages with a simple 2-wire serial interface that allows communication with multiple devices. The MAX5360 has an internal +2V reference and operates from a +2.7V to +3.6V supply. The MAX5361 has an internal +4V reference and operates from a +4.5V to +5.5V supply. The MAX5362 operates over the full +2.7V to +5.5V supply range and has an internal refer-  ence equal to 0 ...

Page 2

... A CONDITIONS (Note 1) Guaranteed monotonic (Note 2) Guaranteed monotonic (Note 2) OS MAX5362 (Notes 2, 3) MAX5360/MAX5361 (Note 2) MAX5362 MAX5360/MAX5361 Code = 63 MAX5362 Code = 63, MAX5360/MAX5361 (Note 4) MAX5360/MAX5361 Code = 63 MAX5362 MAX5360 MAX5361 MAX5362 Code = 63 100µA Code = -100µ power-down mode OUT DD Positive and negative To 1/2LSB, 50kΩ ...

Page 3

... Low-Cost, Low-Power 6-Bit DACs with 2-Wire Serial Interface in SOT23 Package ELECTRICAL CHARACTERISTICS (continued 2.7V to 3.6V (MAX5360 4.5V to 5.5V (MAX5361 unless otherwise noted. Typical values are T MAX PARAMETER SYMBOL POWER REQUIREMENTS Supply Voltage V Supply Current I DD DIGITAL INPUTS (SCL, SDA) Input Low Voltage ...

Page 4

... Note 2: The offset value extrapolated from the range over which the INL is guaranteed. Note 3: MAX5362, tested ±10%. DD Note 4: MAX5360, tested ±10%; MAX5361, tested Note 5: Actual output voltage at full scale is 63/64 Note 6: Output settling time is measured by taking the code from code 1 to code 63, and from code 63 to code 1. Note 7: Guaranteed by design. ...

Page 5

... Low-Cost, Low-Power 6-Bit DACs with 2-Wire Serial Interface in SOT23 Package ( (MAX5360 (MAX5361/MAX5362 DIFFERENTIAL NONLINEARITY vs. CODE 0.010 0.005 0 -0.005 -0.010 -0.015 -0.020 CODE TOTAL UNADJUSTED ERROR vs. CODE 0.15 0.10 0.05 0 -0.05 -0.10 -0.15 -0. CODE FULL-SCALE ERROR vs. TEMPERATURE MAX5360/1/2-10 0.75 MAX5361 0.50 MAX5360 0.25 MAX5362 0 -0 ...

Page 6

... Low-Cost, Low-Power 6-Bit DACs with 2-Wire Serial Interface in SOT23 Package ( (MAX5360 (MAX5361/MAX5362 SUPPLY CURRENT vs. TEMPERATURE 160 155 MAX5361 150 MAX5362 145 140 MAX5360 135 130 -40 - TEMPERATURE (°C) SHUTDOWN SUPPLY CURRENT vs. TEMPERATURE 1.0 0 0.2 0 -40 ...

Page 7

... Low-Cost, Low-Power 6-Bit DACs with 2-Wire Serial Interface in SOT23 Package ( (MAX5360 (MAX5361/MAX5362 MAX5360 OUTPUT VOLTAGE EXITING SHUTDOWN OUT 500mV/div SDA 3V/div 10μs/div MAX5360 OUTPUT SETTLING FROM 3 1/4 FS OUT 0.5V/div SDA 3V/div 1μs/div PIN NAME 1 OUT DAC Voltage Output ...

Page 8

... Table 1 shows the relationship between the DAC code and the analog output voltage. The 6-bit DAC code is binary unipolar with 1LSB = (V MAX5361 have a full-scale output voltage of (+2V - 1LSB) and (+4V - 1LSB), respectively, set by the inter- nal references. The MAX5362 has a full-scale output voltage of (0 ...

Page 9

... Figure 3 shows the timing diagram for signals on the 2- wire bus. The two bus lines (SDA and SCL) must be high when the bus is not in use. The MAX5360/MAX5361/ MAX5362 are receive-only devices (slaves) and must be controlled by a bus master device. Figure 4 shows a GAIN ADJUSTMENT ...

Page 10

... After receiving the data byte, the MAX5360/MAX5361/ MAX5362 acknowledge its receipt and expect a STOP condition, at which point the DAC output is updated. The devices update the output and the power mode only if the second byte is clocked in (SHDN = 0) or out (SHDN = 1) of the device ...

Page 11

... include Schmitt-trigger buffers to accept slow-transition interfaces. This means that optocouplers can interface directly to the MAX5360/MAX5361/MAX5362 without additional external logic. The digital inputs are compati- ble with CMOS logic levels and must not be driven with THRESHOLD ADJUSTMENT voltages higher than V ...

Page 12

Low-Cost, Low-Power 6-Bit DACs with 2-Wire Serial Interface in SOT23 Package For the latest package outline information and land patterns (footprints www.maxim-ic.com/packages. Note that a “+”, “#”, or “-” in the package code indicates RoHS status only. Package ...

Page 13

Low-Cost, Low-Power 6-Bit DACs with 2-Wire Serial Interface in SOT23 Package REVISION REVISION NUMBER DATE 2 3/11 Corrected offset error specification in Electrical Characteristics table Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in ...

Related keywords