description
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
†
‡
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
All currents are positive into and negative out of the specified terminals. Digital drive can exceed 5.5V if input is limited to 10A. Consult the
Packaging Section of the Databook for thermal limitations and considerations of the package.
D
D
D
D
D
D
The UC3709 family of power drivers is an
effective low-cost solution to the problem of
providing fast turn-on and off for the
capacitive gates of power MOSFETs. Made
with a high-speed Schottky process, these
devices will provide up to 1.5 A of either
source or sink current from a totem--pole
output
cross-conduction current spike.
The UC3709 is pin compatible with the
MMH0026 or DS0026, and while the delay
times are longer, the supply current is much
less than these older devices.
With inverting logic, these units feature complete TTL compatibility at the inputs with an output stage that can
swing over 30 V. This design also includes thermal shutdown protection.
Supply Voltage, V
Output Current (Source or Sink)
Digital Inputs}
Power Dissipation at T
Power Dissipation at T
Operating Temperature Range
Storage Temperature Range
Lead Temperature (Soldering, 10 Seconds)
1.5 Amp Source/Sink Drive
Pin Compatible with 0026 Products
40 ns Rise and Fall into 1000pF
Low Quiescent Current
5 V to 40 V Operation
Thermal Protection
Steady--State
Peak Transient
Capacitive Discharge Energy
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
stage
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
configured
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CC
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A
C
= 25°C
= 25°C
. . . . . . . . . . . . . . . . . . . . . . . . . .
for
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
POST OFFICE BOX 655303
minimal
. . . . . . . . . . . . . . . . . . . . . .
A OR B
INPUT
V
CC
simplified schematic (only one driver shown)
REGULATOR
·
5 VOLT
DALLAS, TEXAS 75265
5.6 V
--55°C to 125°C
--65°C to 150°C
6 k
SLUS196A -- NOVEMBER 1996 -- REVISED MARCH 2000
±500 mA
DUAL HIGH- SPEED FET DRIVER
N- -Pkg
THERMAL
±1.5 A
300°C
20 mJ
SENSE
5.5 V
40 V
1 W
3 W
Copyright ã 2000, Texas Instruments Incorporated
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
UC1709, UC2709, UC3709
--55°C to 125°C
--65°C to 150°C
A OR B
GND
INPUT
±500 mA
UDG--00068
300 °C
J- -Pkg
±1.0 A
15 mJ
5.5 V
40V
1 W
2 W
† } } } }
1