TMK316C106KL-T Taiyo Yuden, TMK316C106KL-T Datasheet - Page 13

• Manufacturer Part Number: TMK316C106KL-T
• Description: CAP CER 10UF 25V X5S 1206
• Manufacturer: Taiyo Yuden
• Series: TMKr

Specifications of TMK316C106KL-T

• Capacitance: 10µF
• Voltage - Rated: 25V
• Tolerance: ±10%
• Temperature Coefficient: X5S
• Mounting Type: Surface Mount, MLCC
• Operating Temperature: -55°C ~ 85°C
• Applications: General Purpose
• Package / Case: 1206 (3216 Metric)
• Size / Dimension: 0.126" L x 0.063" W (3.20mm x 1.60mm)
• Thickness: 1.60mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Ratings: -
• Lead Spacing: -
• Other names: 587-1350-2; CE TMK316 C106KL-T

Note 1
Note 2
Note 3
Note 4, 5 :The figure indicates typical inspection. Please refer to individual specifications.
Note 6
Multilayer Ceramic Capacitor Chips
Note on standard condition: "standard condition" referred to herein is defined as follows: 5 to 35C of temperature, 45 to 85% relative humidity, and 86 to 106kPa of air pressure.
When there are questions concerning measurement results: In order to provide correlation data, the test shall be conducted under condition of 20M2C of temperature, 60 to 70% relative humidity,
and 86 to 106kPa of air pressure. Unless otherwise specified, all the tests are conducted under the "standard condition."
16.Loading under Damp Heat
17.Loading at High Tempera-
RELIABILITY DATA
ture
:For 105 type, specified in "High value".
:Thermal treatment (Multilayer): 1 hr of thermal treatment at 150 J0 /K10 C followed by 48M4 hrs of recovery under the standard condition shall be performed before the measurement.
:Voltage treatment (Multilayer): 1 hr of voltage treatment under the specified temperature and voltage for testing followed by 48M4 hrs of recovery under the standard condition shall be performed before the measurement.
:Some of the parts are applicable in rated voltageP1.5. Please refer to individual specifications.
Item
Appearance: No abnor-
mality
Capacitance change:
W i t h i n M 7 . 5 % o r
M0.75pF, whichever is
larger.
Q: CU30 pF: QU200
C＜30 pF: QU 100 +
10C/3
CD Nominal capaci-
tance
Insulation resistance:
500 ME min.
Appearance: No abnor-
mality
Capacitance change:
Within M3% or
M0.3pF, whichever is
larger.
Q: CU30 pF : QU350
10TC＜30 pF: QU275
+ 2.5C
C＜10 pF: QU200 +
10C
CD Nominal
capacitance
Insulation resistance:
1000 ME min.
Temperature Compensating (Class 1)
Standard
Appearance: No abnor-
mality
Capacitance change:
CT2 pF: Within M0.4 pF
CX2 pF: Within M0.75
pF
CD Nominal capaci-
tance
Insulation resistance:
500 ME min.
Appearance: No abnor-
mality
Capacitance change:
Within M3% or
M0.3pF, whichever is
larger.
Insulation resistance:
1000 ME min.
High Frequency Type
Specified Value
50 MEAF or 1000 ME,
whichever is smaller.
Appearance: No abnor-
mality
Capacitance change:
B: Within M12.5%
F: Within M30%
tan d: B: 5.0% max.
Insulation resistance:
25 MEAF or 500 ME,
whichever is the smaller.
Appearance: No abnor-
mality
Capacitance change:
B: Within M12.5%
F: Within M30%
Note 4
tan d:
B: 4.0% max.
F: 7.5% max.
Insulation resistance:
Standard Note1
F: 7.5% max.
High Permittivity (Class 2)
Note 5
Note 4
Note 5
Appearance: No abnor-
mality
Capacitance change:
BJDWithinM12.5L
Note 4
tandD
Insulation resistance:
25 MEAF or 500 ME,
whichever is the smaller.
Note 5
Appearance: No abnormality
Capacitance change:
BJDWithinM12.5L
CDWithinM25L(X6S)
E、FDWithinM30L
Note 4
tandD
Insulation resistance:
50 MEAF or 1000 ME,
whichever is smaller.
Note 5
C、 E、 FDWithinM30L
BJD5.0Lmax.
C、 E、 FD11Lmax.
BJD5.0Lmax.
C、F、FD11Lmax.
WithinM30L(X5S)
WithinM20LFF
WithinM25LFF
High Value
According to JIS C 5102 Clause 9. 9.
Multilayer:
Preconditioning: Voltage treatment (Class 2)
Temperature: 40M2C
Humidity: 90 to 95% RH
Charge and discharge current: 50mA max. (Class 1,2)
Recovery: Recovery for the following period under the standard
Temperature: 60M2C
Humidity: 90 to 95% RH
Duration: 500
Charge and discharge current: 50mA max.
Recovery: 24M2 hrs of recovery under the standard condi-
According to JIS C 5102 clause 9.10.
Multilayer:
Preconditioning: Voltage treatment (Class 2)
Temperature:125M3CfClass 1, Class 2: B, BJfX7Rgg
Duration: 1000
Applied voltage: Rated voltageP2
Recovery: Recovery for the following period under the stan-
dard condition after the removal from test chamber.
As for Ni product, thermal treatment shall be performed
prior to the recovery.
High-Frequency Multilayer:
Temperature: 125M3C (Class 1)
Duration: 1000
Applied voltage: Rated voltageP2
Recovery: 24M2 hrs of recovery under the standard condi-
Duration: 500
Applied voltage: Rated voltage
High-Frequency Multilayer:
Applied voltage: Rated voltage
24M2 hrs (Class 1)
48M4 hrs (Class 2)
24M2 hrs (Class 1)
48M4 hrs (Class 2)
condition after the removal from test chamber.
tion after the removal from test chamber.
tion after the removal from test chamber.
85M2C (Class 2: BJ,F)
Test Methods and Remarks
+24
K
+24
K
+48
K
+48
K
0
0
0
0
hrs
hrs
hrs
hrs
Note 6
3/3
85
4