P6SMB18AT3G ON Semiconductor, P6SMB18AT3G Datasheet - Page 7

• Manufacturer Part Number: P6SMB18AT3G
• Description: TVS ZENER UNIDIR 600W 18V SMB
• Manufacturer: ON Semiconductor

Specifications of P6SMB18AT3G

• Voltage - Reverse Standoff (typ): 15.3V
• Voltage - Breakdown: 17.1V
• Power (watts): 600W
• Polarization: Unidirectional
• Mounting Type: Surface Mount
• Package / Case: DO-214AA, SMB
• Polarity: Unidirectional
• Clamping Voltage: 25.2 V
• Operating Voltage: 15.3 V
• Breakdown Voltage: 17.1 V
• Termination Style: SMD/SMT
• Peak Surge Current: 24 A
• Peak Pulse Power Dissipation: 600 W
• Maximum Operating Temperature: + 150 C
• Minimum Operating Temperature: - 65 C
• Dimensions: 3.56 mm W x 4.32 mm L
• Number Of Elements: 1
• Package Type: SMB
• Operating Temperature Classification: Military
• Reverse Breakdown Voltage: 17.1V
• Reverse Stand-off Voltage: 15.3V
• Leakage Current (max): 5uA
• Peak Pulse Current: 24A
• Test Current (it): 1mA
• Operating Temp Range: -65C to 150C
• Mounting: Surface Mount
• Pin Count: 2
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: P6SMB18AT3GOS; P6SMB18AT3GOS; P6SMB18AT3GOSTR

PUBLICATION ORDERING INFORMATION
SURMETIC is a registered trademark of Semiconductor Components Industries, LLC.
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [e-mail]
ON Semiconductor and
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
L
H
POLARITY INDICATOR
OPTIONAL AS NEEDED
E
E
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
L1
b
c
2.743
0.108
*For additional information on our Pb−Free strategy and soldering
D
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
A1
2.159
0.085
N. American Technical Support: 800−282−9855 Toll Free
Europe, Middle East and Africa Technical Support:
Japan Customer Focus Center
PACKAGE DIMENSIONS
USA/Canada
Phone: [phone]
Phone: 81−3−5773−3850
SOLDERING FOOTPRINT*
http://onsemi.com
CASE 403A−03
ISSUE G
2.261
0.089
SMB
7
A
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. D DIMENSION SHALL BE MEASURED WITHIN DIMENSION P.
SCALE 8:1
DIM
H
A1
L1
A
b
D
D
E
L
c
E
MIN
1.90
0.05
1.96
0.15
3.30
4.06
5.21
0.76
MILLIMETERS
inches
0.51 REF
mm
NOM
2.13
0.10
2.03
0.23
3.56
4.32
5.44
1.02
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
MAX
2.45
0.20
2.20
0.31
3.95
4.60
5.60
1.60
0.075
0.002
0.077
0.006
0.130
0.160
0.205
0.030
MIN
P6SMB6.8AT3/D
0.020 REF
INCHES
0.084
0.004
0.080
0.009
0.140
0.170
0.214
0.040
NOM
0.096
0.008
0.087
0.012
0.156
0.181
0.220
0.063
MAX