NUP4201MR6T1G ON Semiconductor, NUP4201MR6T1G Datasheet - Page 5

• Manufacturer Part Number: NUP4201MR6T1G
• Description: IC TVS DIODE ARRAY HS LINE 6TSOP
• Manufacturer: ON Semiconductor

Specifications of NUP4201MR6T1G

• Voltage - Reverse Standoff (typ): 5V
• Voltage - Breakdown: 6V
• Power (watts): 500W
• Polarization: 4 Channel Array - Bidirectional
• Mounting Type: Surface Mount
• Package / Case: SC-74-6
• Polarity: Unidirectional
• Clamping Voltage: 20 V
• Operating Voltage: 5 V
• Breakdown Voltage: 6 V
• Termination Style: SMD/SMT
• Peak Surge Current: 25 A
• Peak Pulse Power Dissipation: 500 W
• Capacitance: 5 pF
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Dimensions: 1.5 mm W x 3 mm L
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: NUP4201MR6T1GOSTR

array designed to protect sensitive electronics such as
communications systems, computers, and computer
peripherals against damage due to ESD events or transient
overvoltage conditions. Because of its low capacitance, it
can be used in high speed I/O data lines. The integrated
design of the NUP4201MR6 offers surge rated, low
capacitance steering diodes and a TVS diode integrated in
a single package (TSOP−6). If a transient condition occurs,
the steering diodes will drive the transient to the positive rail
of the power supply or to ground. The TVS device protects
the power line against overvoltage conditions to avoid
damage to the power supply and any downstream
components.
NUP4201MR6 Configuration Options
against transient overvoltage conditions by driving them to
a fixed reference point for clamping purposes. The steering
diodes will be forward biased whenever the voltage on the
protected line exceeds the reference voltage (Vf or V
Vf). The diodes will force the transient current to bypass the
sensitive circuit.
reference is connected at pin 2. These pins must be
connected directly to ground by using a ground plane to
minimize the PCB’s ground inductance. It is very important
to reduce the PCB trace lengths as much as possible to
minimize parasitic inductances.
Option 1
V
positive supply rail (V
the supply voltage. The internal TVS diode prevents
overvoltage on the supply rail. Biasing of the steering diodes
reduces their capacitance.
CC
The new NUP4201MR6 is a low capacitance TVS diode
The NUP4201MR6 is able to protect up to four data lines
Data lines are connected at pins 1, 3, 4 and 6. The negative
Protection of four data lines and the power supply using
For this configuration, connect pin 5 directly to the
I/O 1
I/O 2
I/O 3
I/O 4
as reference.
1
2
3
CC
), the data lines are referenced to
6
5
4
APPLICATIONS INFORMATION
V
CC
http://onsemi.com
CC
+
5
Option 2
isolation resistor.
by connecting a series resistor between pin 5 and V
10 kW resistor is recommended for this application. This
will maintain a bias on the internal TVS and steering diodes,
reducing their capacitance.
Option 3
as reference.
those cases in which a fully isolated power supply is
required, the internal TVS can be used as the reference. For
these applications, pin 5 is not connected. In this
configuration, the steering diodes will conduct whenever the
voltage on the protected line exceeds the working voltage of
the TVS plus one diode drop (Vc = Vf + V
ESD Protection of Power Supply Lines
a supply rail provides advantages. Biasing the diodes
reduces their capacitance and minimizes signal distortion.
Implementing this topology with discrete devices does have
disadvantages. This configuration is shown below:
Protection of four data lines with bias and power supply
The NUP4201MR6 can be isolated from the power supply
Protection of four data lines using the internal TVS diode
In applications lacking a positive supply reference or
When using diodes for data line protection, referencing to
I/O 1
I/O 2
I/O 3
I/O 4
I/O 1
I/O 2
I/O 3
I/O 4
1
2
3
1
2
3
6
5
4
6
5
4
TVS
).
V
NC
CC
10 k
CC
. A