135D
Vishay
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 85 °C
(To + 200 °C with voltage derating)
Capacitance Tolerance: At 120 Hz, + 25 °C. ± 20 %
standard. ± 10 %, ± 5 % available as special.
DC Leakage Current (DCL Max.): At + 25 °C and above:
Leakage current shall not exceed the values listed in the
Standard Ratings Tables.
Note
Packaging: The use of formed plastic trays for packaging these axial lead components is standard. Tape and reel is not recommended due to
* Pb containing terminations are not RoHS compliant, exemptions may apply
MODEL
www.vishay.com
1
Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum
ORDERING INFORMATION
135D
This is expressed in
picofarads. The first
number of zeros to
significant figures.
two digits are the
CAPACITANCE
The third is the
the unit weight.
follow
306
Hermetic Seal for - 55 °C to + 200 °C Operation
CAPACITANCE
TOLERANCE
X0 = ± 20 %
X9 = ± 10 %
X5 = ± 5 %
X0
For technical questions, contact:
three-digit block, zeros
rating. A decimal point
DC VOLTAGE RATING
volts. To complete the
is indicated by an “R”
This is expressed in
precede the voltage
(6R3 = 6.3 V)
AT + 85 °C
006
tantalum@vishay.com
FEATURES
• Terminations:
• Standard and extended ratings
• Model
• Designed for the aerospace applications, this capacitor
• Model 135D capacitors are commercial equivalents of
•
Life Test: Capacitors are capable of withstanding a 2000 h
life test at a temperature of + 85 °C or + 125 °C at the
applicable rated DC working voltage.
Following life test:
1. DCL, measured at + 85 °C rated voltage, shall not be in
2. The equivalent series resistance shall not exceed 150 %
3. Change in capacitance shall not exceed 10 % from the
Ratings
Codes
CODE
CASE
100 % tin (RoHS compliant) available
capacitors incorporate the advantages of all the
varieties of electrolytic capacitors and eliminate
most of the disadvantages. These units have a 3 V reverse
voltage capability at + 85 °C and a higher ripple current
capability than any other electrolytic type with similar
combinations of capacitance and case size.
was developed under partial sponsorship of the Marshall
Space Flight Center, National Aeronautics and Space
Administration. The capacitors have a high resistance to
damage from shock and vibration. Extended range ratings
and high temperature designs areavailable.
Tansitor Style; AQ, AR, HAQ, HAR, Mallory-NACC Style;
TLT, TXT, THT, THX and Military Style CLR79 and CLR81,
designed to meet the performance requirements of Military
Specification MIL-PRF-39006/22/25. Capacitors to meet
MIL-PRF- 39006/22/25 should be ordered by part numbers
shown in that specification.
Compliant to RoHS directive 2002/95/EC
Case
Table
excess of the original requirement.
of the initial requirement.
initial measurement.
See
and
C
3 = High temperature film insulation
6 = High temperature film insulation
High temperature (max. + 200 °C)
Std. temperature (max. + 125 °C)
135D
2 = Polyester insulation sleeve
0 = No insulating sleeve
8 = No insulating sleeve
STYLE NUMBER
standard
tantalum-case
2
tin/lead
Document Number: 40024
electrolytic
(SnPb),
Revision: 03-Feb-10
(standard design)
(RoHS compliant
E3 = 100 % tin
Blank = SnPb
COMPLIANT
termination
termination
design)
RoHS
E3