T494A475K010AT Kemet, T494A475K010AT Datasheet - Page 18

• Manufacturer Part Number: T494A475K010AT
• Description: CAP TANT 4.7UF 10V 10% SMD
• Manufacturer: Kemet
• Series: T494r
• Type: Moldedr

Specifications of T494A475K010AT

• Capacitance: 4.7µF
• Voltage - Rated: 10V
• Tolerance: ±10%
• Esr (equivalent Series Resistance): 3.000 Ohm
• Operating Temperature: -55°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: 1206 (3216 Metric)
• Size / Dimension: 0.126" L x 0.063" W (3.20mm x 1.60mm)
• Height: 0.063" (1.60mm)
• Manufacturer Size Code: A
• Features: General Purpose
• Voltage Rating: 10 Volts
• Esr: 3 Ohms
• Operating Temperature Range: - 55 C to + 125 C
• Mfr Case Code: A Case
• Dimensions: 1.6 mm W x 3.2 mm L x 1.6 mm H
• Lead Spacing: 0.8 mm
• Leakage Current: 0.5 uAmps
• Product: Tantalum Solid Low ESR Industrial Grade
• Termination Style: SMD/SMT
• Tolerance (+ Or -): 10%
• Voltage: 10VDC
• Mounting Style: Surface Mount
• Polarity: Polar
• Construction: SMT Chip
• Case Style: Molded
• Case Code: A
• Lead Spacing (nom): Not Requiredmm
• Df: 6%
• Dcl: 0.5uA
• Seal: Not Required
• Insulation: Not Required
• Failure Rate: Not Required
• Wire Form: Not Required
• Product Length (mm): 3.2mm
• Product Height (mm): 1.6mm
• Product Depth (mm): 1.6mm
• Product Diameter (mm): Not Requiredmm
• Seated Plane Height: Not Requiredmm
• Length W/weld (max): Not Requiredmm
• Operating Temp Range: -55C to 125C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Spacing: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Low ESR MnO
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 Kg minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA-556 and EIA-624.
Figure 2 – Maximum Component Rotation
Figure 3 – Maximum Lateral Movement
Figure 4 – Bending Radius
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 [phone] • www.kemet.com
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180° from the plane of the
carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300±10 mm/minute.
8mm & 12mm Tape
Bo
Embossed
Carrier
12mm & 16mm
Tape Width
2
8mm
Ao
Tantalum Surface Mount Capacitors – T494 Industrial Grade Low ESR MnO
R
T
°
0.5 mm maximum
0.5 mm maximum
Bending
Radius
Maximum Component Rotation
8,12
Tape
Width (mm)
16-200
Typical Component Centerline
Typical Pocket Centerline
Punched
Carrier
0.1 Newton to 1.0 Newton (10gf to 100gf)
0.1 Newton to 1.3 Newton (10gf to 130gf)
Top View
R
16mm Tape
10
Maximum
Rotation (
20
Peel Strength
1.0 mm maximum
1.0 mm maximum
T
°
)
s
°
Maximum Component Rotation
2
Series
8,12
72-200
Tape
Width (mm)
16-56
Side View
Maximum
10
Rotation (
20
5
S
°
)
T2008-1 • 5/18/2011
18 18