CHM3D Cooper/Bussmann, CHM3D Datasheet - Page 6

• Manufacturer Part Number: CHM3D
• Description: FUSEHOLDER MDGT MOD 3POS 10X38
• Manufacturer: Cooper/Bussmann
• Series: CHr
• Type: Blockr

Specifications of CHM3D

• Fuse Size: 1.496" L x 0.394" Dia (38mm x 10mm)
• Number Of Circuits: 3
• Mounting Type: DIN Rail
• Termination Style: Screw Terminal
• Voltage: 690V
• Current Rating: 32A
• Voltage Rating Vdc: 600V
• Voltage Rating Vac: 600V
• Fuse Current: 30A
• Fuse Holder Type: Fuse Holder
• No. Of Fuses: 3
• Fuse Size Held: 13/32 X 1.1/2", 10 X 38mm, Midget
• Fuse Size Metric: 10 X 38mm
• Product: Holder
• Voltage Rating: 600 Volts
• Size (lxwxh): 10 mm X 38 mm
• For Use With: FWC-8A10F - FUSE 8A 600V HS FERRULEFWC-6A10F - FUSE 6A 600V HS FERRULE283-3098 - FUSE 32A 600V HS FERRULE283-3097 - FUSE 25A 600V HS FERRULE283-3096 - FUSE 20A 600V HS FERRULE283-3095 - FUSE 16A 600V HS FERRULEFWC-12A10F - FUSE 12A 600V HS FERRULE283-3094 - FUSE 10A 600V HS FERRULEFWA-5A10F - FUSE 5A 150V HS FERRULEFWA-30A10F - FUSE 30A 150V HS FERRULEFWA-25A10F - FUSE 25A 150V HS FERRULEFWA-20A10F - FUSE 20A 150V HS FERRULEFWA-15A10F - FUSE 15A 150V HS FERRULEFWA-10A10F - FUSE 10A 150V HS FERRULEBAF-25 - FUSE 250V 25A FERRULE FAST ACTFNM-4 - FUSE 4A 250V T-LAG FNMBAF-5 - FUSE 250V 5AMP FERRULE FAST ACTBAF-4 - FUSE 250V 4AMP FERRULE FAST ACTBAF-3 - FUSE 250V 3AMP FERRULE FAST ACTBAF-2 - FUSE 250V 2AMP FERRULE FAST ACTKTK-R-3/4 - FUSE 3/4A 600VAC FAST KTK-R283-2465 - FUSE 8A 600VAC FAST KTK283-2464 - FUSE 6A 600VAC FAST KTK283-2463 - FUSE 5A 600VAC FAST KTK283-2462 - FUSE 4A 600VAC FAST KTK283-2470 - FUSE 30A 600VAC FAST KTK283-2461 - FUSE 2A 600VAC FAST KTK283-2469 - FUSE 25A 600VAC FAST KTK283-2468 - FUSE 20A 600VAC FAST KTK283-2467 - FUSE 15A 600VAC FAST KTK283-2466 - FUSE 10A 600VAC FAST KTK283-2460 - FUSE 1/2A 600VAC FAST KTK283-2459 - FUSE 1/4A 600VAC FAST KTK283-2477 - FUSE 5A 600VAC T-LAG CC TYPE283-2476 - FUSE 4A 600VAC T-LAG CC TYPE283-2475 - FUSE 3-1/2A 600VAC T-LAG CC TYP283-2482 - FUSE 30A 600VAC T-LAG CC TYPE283-2474 - FUSE 3A 600VAC T-LAG CC TYPE283-2481 - FUSE 25A 600VAC T-LAG CC TYPE283-2480 - FUSE 20A 600VAC T-LAG CC TYPE283-2471 - FUSE 1/4A 600VAC T-LAG CC TYPE283-2472 - FUSE 1/2A 600VAC T-LAG CC TYPE283-2479 - FUSE 15A 600VAC T-LAG CC TYPE283-2478 - FUSE 10A 600VAC T-LAG CC TYPE283-2473 - FUSE 1A 600VAC T-LAG CC TYPE283-2489 - FUSE 6-1/4A 250V T-LAG FNM283-2488 - FUSE 5A 250V T-LAG FNM283-2486 - FUSE 3A 250V T-LAG FNM283-2487 - FUSE 3-2/10A 250V T-LAG FNM283-2494 - FUSE 30A 32VAC T-LAG FNM283-2485 - FUSE 2-1/4A 250V T-LAG FNM283-2493 - FUSE 20A 32VAC T-LAG FNM283-2483 - FUSE 1A 250V T-LAG FNM283-2484 - FUSE 1-6/10A 250V T-LAG FNM283-2492 - FUSE 15A 125VAC T-LAG FNM283-2491 - FUSE 12A 125VAC T-LAG FNM283-2490 - FUSE 10A 250V T-LAG FNM
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

The only controlled copy of this Data Sheet is the electronic read-only version located on the Cooper Bussmann Network Drive. All other copies of
this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical informa-
tion that will help the end user with design applications. Cooper Bussmann reserves the right, without notice, to change design or construction of
any products and to discontinue or limit distribution of any products. Cooper Bussmann also reserves the right to change or update, without notice,
any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
Remote Fuse Monitoring Accessory – CH-PLC
UL Class CC, Midget and IEC 10x38 fuses
Description
A resetable three-phase remote fuse monitor that
integrates with a Programmable Logic Controller (PLC) or
other monitoring and control equipment.
Specifications:
• Power Input: 24Vdc / 5mA
• Sensing Voltage: 600V/30mA
• Output Signals: Digital 0Vdc (Low), 24Vdc (High)
• Rated Impulse Voltage: 8kV
• Local Indication: Two distinct LEDs indicate unit power
• Flammability Rating: UL 94V0
Wiring:
• For power, signal and ground connections use 22-24AWG
Emissions and Immunity Testing:
• Electrostatic Discharge IEC 61000-4-2
• Electrical Fast Transient/Burst IEC 6100-4-4
• Surge Immunity IEC61000-4-5
Packaging:
• The CH-PLC is packaged individually
• A single unit monitors up to three phases
• Package includes 0.11” (2.8mm) quick connects for power,
0210
- 0Vdc Low – Fuse is good
- 24Vdc High – Fuse has opened
When the fuse opens, the output signal is sent high and will
remain high until the unit is reset
(green) and open fuse (red). Upon the replacement of the
fuse, the actuation of the reset switch will reset the open
fuse LED
(0.25mm
signal and ground connections
© 2010 Cooper Bussmann
St. Louis, MO 63178
www.cooperbussmann.com
De-energize all circuits before installing or removing any CH-PLC devices and follow all prescribed safety procedures.
BU-SB10208
2
) 300V rated wire
Minimum Circuit Voltage:
• Minimum circuit voltage required across the CH holder is
Installation Technique:
• Mounts on the left side of the fuse holder and mechanically
IP20 Rating: Yes
Environmental Data:
• Storage and Operating Temperature: -20°C to 75°C
Agency Information:
• UL 508
• cULus to CSA Standard 22.2 No.14
PLC Programming:
• The CH-PLC signal line is designed to provide a digital
• Programmable Logic Control program must be written to
• The PLC program should check for consecutive high signals
100Vac for the remote indication device to operate
interlocks with the fuse holder switch handle with hardware
provided
input to a PLC I/O card.
properly interpret the input signal to the PLC.
before taking action on a critical process.
Page 6 of 6
Data Sheet 2053