HPCPR41F1S Switchcraft Inc., HPCPR41F1S Datasheet - Page 16

• Manufacturer Part Number: HPCPR41F1S
• Description: CONN PLUG PANEL RND 4PIN .187
• Manufacturer: Switchcraft Inc.
• Series: HPCr
• Type: Powerr

Specifications of HPCPR41F1S

• Rohs Information: Switchcraft RoHS Info.
• Connector Type: Jack, Non-Gendered
• Number Of Positions: 4
• Mounting Type: Panel Mount, Flange
• Termination: Quick Connect - .187" (4.7mm)
• Fastening Type: Push-Pull
• Shell Material, Finish: Thermoplastic
• Gender: PL
• Body Orientation: Straight
• Housing Material: Thermoplastic
• Number Of Contacts: 4POS
• Number Of Ports: 1Port
• Number Of Terminals: 4
• Current Rating (max): 50A
• Contact Material: Copper Alloy
• Operating Temp Range: -55C to 85C
• Voltage Rating Max: 1500VAC
• Mounting Style: Panel
• Termination Method: Faston
• Contact Plating: Silver
• Product Diameter (mm): 50.8mm
• Product Length (mm): 33.3mm
• Standard: Speakon, HPC
• Number Of Positions / Contacts: 4
• Color: Black
• Voltage Rating: 1500 Volts
• Current Rating: 50 Amps
• Termination Style: Quick Disconnect
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Orientation: -
• Shell Size - Insert: -
• Ingress Protection: -
• Shell Size, Military: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

FAX: 773 792 - 2129
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
E SERIES RECEPTACLES
E Series Q-G
inserts. Quick insert release is accomplished by turning
screw lock from front of insert. Insert can then be removed
from the rear. For PC board applications, insert can be
removed/assembled to the housing while soldered to
the PC board.
FEATURES
• Replaces Neutrik D Series
• 3-pin contact; male and female types
• Both male and female fit in same panel cutout
• Choice of 4 terminations; solder cups, conical springs,
• Inserts and housings can be specified separately
• Quick release inserts for ease of removal
• Locking receptacles
• Protected ground clip minimizes scooping damage
• Insert lock detent resists disassembly from shock or
• Silver and gold-plated contacts available
• Rugged metal shells; black or satin nickel finishes
• Through-the-shell ground connection and all-metal
• Compatible with Switchcraft Q-G
QUICK RELEASE INSERT
In two simple steps, inserts can be released while
housing stays fastened to the panel.
1. With a small screwdriver, twist insert locking screw
2. Remove insert from the rear of the housing.
TERMINALS
Four terminations are available on E Series receptacles:
1. Conical Spring Solder terminals – conical spring on
2. Straight PC terminals – direct termination to PC
straight or right angle PC terminals.
vibration during normal handling and transportation
shells for greater shielding effectiveness
connectors with similar configurations
each pin holds wire in place providing constant pressure
during soldering process. This effectively acts as a third
hand, assuring a high quality solder termination.
Housing mounts to panel.
board. Housing mounts to panel.
from front of insert.
Solder Terminals
Conical Spring
®
Receptacles are available with quick release
Receptacles
E Series
Straight PC
Terminals
®
, QGP and other
DIMENSIONS ARE FOR REFERENCE ONLY
PC Terminals
Right Angle
3. Right-angle PC terminals - direct termination to PC
4. SC - Solder cup
SPECIFICATIONS
ELECTRICAL
Contact Resistance: 50 milliohms maximum, per pole.
Current Rating: 15A
Insulation Resistance: 2 X 10
Dielectric Resistance: 1,000 V rms
Capacitance: 10 pF
MECHANICAL
Insertion/Withdrawal Forces: 7 pounds maximum /
5 pounds nominal insertion; 7 pounds maximum /
5 pounds nominal withdrawal.
Life: 10,000 operations (minimum).
ENVIRONMENTAL
Thermal Range: -55° C to +85° C
Humidity: Meets MIL-STD-202F, method 106E.
Thermal Shock: Meets MIL-STD-202F, method 107D.
Salt Spray: Meets MIL-STD-202F, method 101D.
MATERIAL
Shells: Die-cast; satin-nickel or Black Velvet.
Inserts: Glass-filled thermoplastic.
Socket Contacts: Copper alloy, silver- or gold-plated.
Pin Contacts: Copper alloy, silver- or gold-plated.
Latch Release: Steel, nickel-plated.
Insert Locking Cam: Die-cast zinc.
E Series receptacles can be specified as complete assemblies,
or as separate inserts and housings. Stocking separate
inserts and housings offer considerable cost and time sav-
ings by minimizing inventory and maximizing configuration
possibilities.
board at a right-angle. Housing mounts to panel.
(mm)
Inch
CONNECTORS & RECEPTACLES
E SERIES Q-G
E SERIES Q-G
Solder cup
6
MΩ
®
®
RECEPTACLES
RECEPTACLES
11