HK100518NJ-T Taiyo Yuden, HK100518NJ-T Datasheet - Page 19

• Manufacturer Part Number: HK100518NJ-T
• Description: INDUCTOR HI FREQ 18NH 5% 0402
• Manufacturer: Taiyo Yuden
• Series: HKr
• Type: Ceramicr

Specifications of HK100518NJ-T

• Inductance: 18nH
• Current: 310mA
• Tolerance: ±5%
• Dc Resistance (dcr): 550 mOhm Max
• Q @ Freq: 8 @ 100MHz
• Self Resonant Freq: 2.1GHz
• Package / Case: 0402 (1005 Metric)
• Mounting Type: Surface Mount
• Operating Temperature: -55°C ~ 85°C
• Frequency - Test: 100MHz
• Applications: General Purpose
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Shielding: -
• Current - Saturation: -
• Current - Temperature Rise: -
• Other names: 587-1522-2; HK100518NJ-T

Precautions on the use of Multilayer chip Inductors, Multilayer chip inductors for high frequency, Multilayer ferrite chip beads
8. Storage conditions
△
！
PRECAUTIONS
当社カタログをご使用の際には 「当社製品に関するお断り」 を必ずお読みください。
Stages
◆Storage
1. To maintain the solderability of terminal electrodes
Recommended conditions
Ambient temperature
Humidity
The ambient temperature must be kept below 30
℃. Even under ideal storage conditions inductor
electrode solderability decreases as time passes, so
inductors should be used within 6 months from the
time of delivery.
*The packaging material should be kept where no
chlorine or sulfur exists in the air.
and to keep the packaging material in good condi-
tion, care must be taken to control temperature
and humidity in the storage area. Humidity should
especially be kept as low as possible.
Precautions
Below 70% RH
Below 40 ℃
1. If the parts are stocked in a high temperature and humidity environment,
problems such as reduced solderability caused by oxidation of terminal
electrodes and deterioration of taping/packaging materials may take
place. For this reason, components should be used within 6 months from
the time of delivery. If exceeding the above period, please check solder-
ability before using the inductors
△
！
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
Technical considerations
7/7
267
5