NR10050T220M Taiyo Yuden, NR10050T220M Datasheet - Page 10

• Manufacturer Part Number: NR10050T220M
• Description: INDUCTOR 22UH 2.6A 20% SMD
• Manufacturer: Taiyo Yuden
• Series: NRr

Specifications of NR10050T220M

• Inductance: 22µH
• Current: 2.6A
• Current - Saturation: 2.6A
• Current - Temperature Rise: 2.5A
• Tolerance: ±20%
• Shielding: Shielded
• Dc Resistance (dcr): 58.5 mOhm Max
• Self Resonant Freq: 10MHz
• Package / Case: 0.394" L x 0.386" W x 0.197" H (10.00mm x 9.80mm x 5.00mm)
• Mounting Type: Surface Mount
• Operating Temperature: -25°C ~ 105°C
• Frequency - Test: 100kHz
• Applications: Power Supplies
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Q @ Freq: -
• Other names: 587-1699-2

SMD Inductors
△
！
PRECAUTIONS
1.Circuit Design
2.PCB Design
3.Considerations for
4.Soldering
5.Cleaning
6.Handling
7.Storage conditions
当社カタログをご使用の際には 「当社製品に関するお断り」 を必ずお読みください。
automatic placement
Stages
・ Recommended conditions
Operating environment,
1.The products described in this specification are intended for
Land pattern design
1.Please refer to a recommended land pattern.
Adjustment of mounting machine
1.Excessive impact load should not be imposed on the
2.Mounting and soldering conditions should be checked
Reflow soldering
1.Please contact any of our offices for a reflow soldering, and
2.This products is reflow soldering only.
3.Please do not add any stress to a product until it returns in
Lead free soldering
1.When using products with lead free soldering, we request to
Recommended conditions for using a soldering iron:
Cleaning conditions
1.Washing by supersonic waves shall be avoided.
Handling
1.Keep the product away from all magnets and magnetic objects.
Breakaway PC boards (splitting along perforations)
1.When splitting the PC board after mounting product, care
2.Board separation should not be done manually, but by using
Mechanical considerations
1.Please do not give the product any excessive mechanical shocks.
2.Please do not add any shock and power to a product in
Pick-up pressure
1.Please do not push to add any pressure to a winding part.
Packing
1.Please avoid accumulation of a packing box as much as possible.
Storage
1.To maintain the solderability of terminal electrodes and to
Ambient temperature 0∼40℃
Humidity
The ambient temperature must be kept below 30℃. Even under
ideal storage conditions, solderability of products electrodes
may decrease as time passes. For this reason, product should
be used within 6 months from the time of delivery.
In case of storage over 6 months, solderability shall be
checked before actual usage.
use
equipment,
equipment, and household equipment). They are not
intended for use in mission-critical equipment or systems
requiring special quality and high reliability (traffic systems,
safety equipment, aerospace systems, nuclear control
systems and medical equipment including life-support
systems,) where product failure might result in loss of life,
injury or damage. For such uses, contact TAIYO YUDEN
Sales Department in advance.
products when mounting onto the PC boards.
beforehand.
refer to the recommended condition specified.
normal temperature after reflow soldering.
use them after confirming of adhesion, temperature of
resistance to soldering heat, soldering etc sufficiently.
( NR10050 type)
should be taken not to give any stresses of deflection or
twisting to the board.
the appropriate devices.
transportation.
Please do not give any shock and push into a ferrite core
exposure part.
keep the packing material in good condition, temperature
and humidity in the storage area should be controlled.
Put the soldering iron on the land-pattern.
Soldering iron's temperature - Below 350 ℃
Duration - 3 seconds or less
The soldering iron should not directly touch the inductor.
in
general
telecommunications
electronic
Precautions
Below 70% RH
equipment,(office
systems,
measuring
supply
【BRC1608, BRL2012, BRL2518, BRC2016, BＲ Ｌ 3225Type】
【NRH24, NR30/40/60/80Type】
【NR10050Type】
Surface Mounting
・ Mounting and soldering conditions should be checked beforehand.
・ Applicable soldering process to this products is reflow soldering only.
1. When installing products, care should be taken not to apply distortion stress as it
1.If products are used beyond the range of the recommended conditions, heat stresses
1.If washing by supersonic waves, supersonic waves may cause broken products.
1.Planning pattern configurations and the position of products should be carefully
1.There is a case to be damaged by a mechanical shock.
2.There is a case to be broken by the handling in transportation.
1.Damage and a characteristic can vary with an excessive shock or stress.
1.There is a case that transformation and a product of tape are damaged by
1.Under a high temperature and humidity environment, problems such as reduced
may deform the products.
may deform the products, and consequently degrade the reliability of the products.
performed to minimize stress.
accumulation of a packing box.
solderability caused by oxidation of terminal electrodes and deterioration of
taping/packaging materials may take place.
300
200
100
300
200
100
300
200
100
0
0
0
Recommended reflow condition （Pb free solder）
Recommended reflow condition （Pb free solder）
Recommended reflow condition （Pb free solder）
150∼180
150∼180
150∼180
90±30sec
90±30sec
90±30sec
Ｈeating Time 【 sec】
Ｈeating Time 【 sec】
Ｈeating Time 【 sec】
△
！
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
Technical considerations
30±10sec
230℃ min
30±10sec
30±10sec
230℃
230℃
5sec max
5sec max
min
5sec max
min
Peak ： 260＋5/ー0℃
Peak ： 250＋5/ー0℃
Peak ： 250＋5/ー0℃
375
5