ATTINY24V-10PU Atmel, ATTINY24V-10PU Datasheet - Page 160

• Manufacturer Part Number: ATTINY24V-10PU
• Description: IC MCU AVR 2K FLASH 10MHZ 14-DIP
• Manufacturer: Atmel
• Series: AVR® ATtinyr

Specifications of ATTINY24V-10PU

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 10MHz
• Connectivity: USI
• Peripherals: Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT
• Number Of I /o: 12
• Program Memory Size: 2KB (1K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 128 x 8
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 14-DIP (0.300", 7.62mm)
• Processor Series: ATTINY2x
• Core: AVR8
• Data Bus Width: 8 bit
• Data Ram Size: 128 B
• Interface Type: SPI
• Maximum Clock Frequency: 10 MHz
• Number Of Programmable I/os: 12
• Number Of Timers: 2
• Operating Supply Voltage: 1.8 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 10-bit
• Cpu Family: ATtiny
• Device Core: AVR
• Device Core Size: 8b
• Frequency (max): 10MHz
• Total Internal Ram Size: 128Byte
• # I/os (max): 12
• Number Of Timers - General Purpose: 2
• Operating Supply Voltage (typ): 2.5/3.3/5V
• Operating Supply Voltage (max): 5.5V
• Operating Supply Voltage (min): 1.8V
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Through Hole
• Pin Count: 14
• Package Type: PDIP
• Package: 14PDIP
• Family Name: ATtiny
• Maximum Speed: 10 MHz
• For Use With: ATSTK600-DIP40 - STK600 SOCKET/ADAPTER 40-PDIP770-1007 - ISP 4PORT ATMEL AVR MCU SPI/JTAGATAVRISP2 - PROGRAMMER AVR IN SYSTEMATSTK505 - ADAPTER KIT FOR 14PIN AVR MCU
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

19.2
160
Fuse Bytes
ATtiny24/44/84
The ATtiny24/44/84 have three fuse bytes.
describe the functionality of all the fuses and how they are mapped into the fuse bytes. Note that
the fuses are read as logical zero, “0”, if they are programmed.
Table 19-3.
Notes:
Table 19-4.
Notes:
Fuse Extended Byte
SELFPRGEN
Fuse High Byte
RSTDISBL
DWEN
SPIEN
WDTON
EESAVE
BODLEVEL2
BODLEVEL1
BODLEVEL0
(2)
(3)
1. Enables SPM instruction. See
1. See
2. DWEN must be unprogrammed when Lock Bit security is required. See
3. The SPIEN Fuse is not accessible in SPI programming mode.
4. Programming this fues will disable the Watchdog Timer Interrupt. See
5. See
(4)
Fuses. After programming the RSTDISBL fuse, high-voltage serial programming must be used
to change fuses and allow further programming.
Memory Lock Bits” on page
a Function of the Fuse Settings of WDTON” on page 43
(1)
(5)
(5)
(5)
(1)
Fuse Extended Byte
Fuse High Byte
“Alternate Functions of Port B” on page 65
Table 20-7 on page 179
Bit No
7
6
6
4
3
2
1
0
Bit No
7
6
5
4
3
2
1
0
Description
External Reset disable
DebugWIRE Enable
Enable Serial Program and Data
Downloading
Watchdog Timer always on
EEPROM memory is preserved through
the Chip Erase
Brown-out Detector trigger level
Brown-out Detector trigger level
Brown-out Detector trigger level
Description
-
-
-
-
-
-
-
Self-Programming Enable
159.
for BODLEVEL Fuse decoding.
“Self-Programming the Flash” on page
Table
19-3,
for description of RSTDISBL and DWEN
Table 19-4
for details.
Default Value
1 (unprogrammed)
1 (unprogrammed)
0 (programmed, SPI prog.
enabled)
1 (unprogrammed)
1 (unprogrammed,
EEPROM not preserved)
1 (unprogrammed)
1 (unprogrammed)
1 (unprogrammed)
and
Default Value
1 (unprogrammed)
1 (unprogrammed)
1 (unprogrammed)
1 (unprogrammed)
1 (unprogrammed)
1 (unprogrammed)
1 (unprogrammed)
1 (unprogrammed)
153.
“WDT Configuration as
“Program And Data
Table 19-5
8006K–AVR–10/10
briefly