PIC18F25K20-E/SO Microchip Technology, PIC18F25K20-E/SO Datasheet - Page 231

• Manufacturer Part Number: PIC18F25K20-E/SO
• Description: IC PIC MCU FLASH 16KX16 28-SOIC
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F25K20-E/SO

• Core Size: 8-Bit
• Program Memory Size: 32KB (16K x 16)
• Core Processor: PIC
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 24
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 1.5K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 11x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 28-SOIC (7.5mm Width)
• Controller Family/series: PIC18
• No. Of I/o's: 25
• Eeprom Memory Size: 256Byte
• Ram Memory Size: 1536Byte
• Cpu Speed: 64MHz
• No. Of Timers: 4
• Package: 28SOIC W
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 64 MHz
• Operating Supply Voltage: 2.5|3.3 V
• Data Bus Width: 8 Bit
• Number Of Programmable I/os: 25
• Interface Type: I2C/SPI/USART
• On-chip Adc: 11-chx10-bit
• Number Of Timers: 4
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164112 - VOLTAGE LIMITER MPLAB ICD2 VPP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

FIGURE 17-27:
FIGURE 17-28:
 2010 Microchip Technology Inc.
SDA
SCL
SEN
S
BCLIF
SSPIF
S
BCLIF
SSPIF
SDA
SCL
SEN
BUS COLLISION DURING START CONDITION (SCL = 0)
BRG RESET DUE TO SDA ARBITRATION DURING START CONDITION
SDA pulled low by other master.
Reset BRG and assert SDA.
‘0’
‘0’
SCL = 0 before BRG time-out,
bus collision occurs. Set BCLIF.
Set SEN, enable Start
sequence if SDA = 1, SCL = 1
Less than T
BRG
SDA = 0, SCL = 1
SDA = 0, SCL = 1
SDA = 0, SCL = 1,
set SSPIF
T
Set SEN, enable START
sequence if SDA = 1, SCL = 1
BRG
S
Set S
T
BRG
PIC18F2XK20/4XK20
T
BRG
Set SSPIF
SCL = 0 before SDA = 0,
bus collision occurs. Set BCLIF.
SCL pulled low after BRG
time-out
Interrupt cleared
by software
Interrupts cleared
by software
‘0’
‘0’
‘0’
DS41303G-page 231