PIC18LF14K50-I/SS Microchip Technology, PIC18LF14K50-I/SS Datasheet - Page 236

• Manufacturer Part Number: PIC18LF14K50-I/SS
• Description: IC PIC MCU FLASH 16K 1.8V 20SSOP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18LF14K50-I/SS

• Core Size: 8-Bit
• Program Memory Size: 16KB (8K x 16)
• Core Processor: PIC
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 14
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 11x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SSOP
• Controller Family/series: PIC18
• No. Of I/o's: 15
• Eeprom Memory Size: 256Byte
• Ram Memory Size: 768Byte
• Cpu Speed: 48MHz
• No. Of Timers: 4
• Processor Series: PIC18LF
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 256 B
• Interface Type: EUSART, I2C, MSSP, SPI, USB
• Maximum Clock Frequency: 32 KHz
• Number Of Programmable I/os: 18
• Number Of Timers: 4
• Operating Supply Voltage: 1.8 V to 3.6 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, DM164127, DV164126
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 12 Channel
• Package: 20SSOP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 48 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

PIC18F/LF1XK50
19.1.3
The power-managed mode that is invoked with the
SLEEP instruction is determined by the setting of the
IDLEN bit of the OSCCON register at the time the
instruction is executed. All clocks stop and minimum
power is consumed when SLEEP is executed with the
IDLEN bit cleared. The system clock continues to sup-
ply a clock to the peripherals but is disconnected from
the CPU when SLEEP is executed with the IDLEN bit
set.
19.2
In the Run modes, clocks to both the core and
peripherals are active. The difference between these
modes is the clock source.
19.2.1
The PRI_RUN mode is the normal, full power execution
mode of the microcontroller. This is also the default
mode upon a device Reset, unless Two-Speed Start-up
is enabled (see
Mode”
off the oscillator defined by the FOSC bits of the
CONFIGH Configuration register.
19.2.2
In SEC_RUN mode, the CPU and peripherals are
clocked from the secondary external oscillator. This
gives users the option of lower power consumption
while still using a high accuracy clock source.
SEC_RUN mode is entered by setting the SCS<1:0>
bits of the OSCCON register to ‘01’. When SEC_RUN
mode is active all of the following are true:
• The main clock source is switched to the
• Primary external oscillator is shut down
• T1RUN bit of the T1CON register is set
• OSTS bit is cleared.
DS41350E-page 236
secondary external oscillator
Note:
for details). In this mode, the device operated
Run Modes
MULTIPLE FUNCTIONS OF THE
SLEEP COMMAND
PRI_RUN MODE
SEC_RUN MODE
The secondary external oscillator should
already be running prior to entering
SEC_RUN mode. If the T1OSCEN bit is
not set when the SCS<1:0> bits are set to
‘01’, entry to SEC_RUN mode will not
occur until T1OSCEN bit is set and sec-
ondary external oscillator is ready.
Section 2.12 “Two-Speed Start-up
Preliminary
19.2.3
In RC_RUN mode, the CPU and peripherals are
clocked from the internal oscillator. In this mode, the
primary external oscillator is shut down. RC_RUN
mode provides the best power conservation of all the
Run modes when the LFINTOSC is the system clock.
RC_RUN mode is entered by setting the SCS1 bit.
When the clock source is switched from the primary
oscillator to the internal oscillator, the primary oscillator
is shut down and the OSTS bit is cleared. The IRCF bits
may be modified at any time to immediately change the
clock speed.
RC_RUN MODE
 2010 Microchip Technology Inc.