PIC16F913-I/SS Microchip Technology, PIC16F913-I/SS Datasheet - Page 3

• Manufacturer Part Number: PIC16F913-I/SS
• Description: IC PIC MCU FLASH 4KX14 28SSOP
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F913-I/SS

• Core Size: 8-Bit
• Program Memory Size: 7KB (4K x 14)
• Core Processor: PIC
• Speed: 20MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LCD, POR, PWM, WDT
• Number Of I /o: 24
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 5x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-SSOP
• Controller Family/series: PIC16F
• No. Of I/o's: 24
• Eeprom Memory Size: 256Byte
• Ram Memory Size: 256Byte
• Cpu Speed: 20MHz
• No. Of Timers: 3
• Package: 28SSOP
• Device Core: PIC
• Family Name: PIC16
• Maximum Speed: 20 MHz
• Operating Supply Voltage: 5 V
• Data Bus Width: 8 Bit
• Number Of Programmable I/os: 24
• Interface Type: I2C/SPI/USART
• On-chip Adc: 5-chx10-bit
• Number Of Timers: 3
• Processor Series: PIC16F
• Core: PIC
• Data Ram Size: 352 B
• Maximum Clock Frequency: 20 MHz
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, DV164120
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164307 - MODULE SKT FOR PM3 28SSOPXLT28SS-1 - SOCKET TRANSITION ICE 28SSOP
• Lead Free Status / Rohs Status: Details

High-Performance RISC CPU:
• Only 35 instructions to learn:
• Operating speed:
• Program Memory Read (PMR) capability
• Interrupt capability
• 8-level deep hardware stack
• Direct, Indirect and Relative Addressing modes
Special Microcontroller Features:
• Precision Internal Oscillator:
• Software selectable 31 kHz internal oscillator
• Power-Saving Sleep mode
• Wide operating voltage range (2.0V-5.5V)
• Industrial and Extended temperature range
• Power-on Reset (POR)
• Power-up Timer (PWRT) and Oscillator Start-up
• Brown-out Reset (BOR) with software control
• Enhanced Low-Current Watchdog Timer (WDT)
• Multiplexed Master Clear with pull-up/input pin
• Programmable code protection
• High-Endurance Flash/EEPROM cell:
© 2007 Microchip Technology Inc.
- All single-cycle instructions except branches
- DC – 20 MHz oscillator/clock input
- DC – 200 ns instruction cycle
- Factory calibrated to ±1%, typical
- Software selectable frequency range of
- Software tunable
- Two-Speed Start-up mode
- External Oscillator fail detect for critical
- Clock mode switching during operation for
Timer (OST)
option
with on-chip oscillator (software selectable
nominal 268 seconds with full prescaler) with
software enable
- 100,000 write Flash endurance
- 1,000,000 write EEPROM endurance
- Flash/Data EEPROM retention: > 40 years
28/40/44/64-Pin Flash-Based, 8-Bit CMOS Microcontrollers with
8 MHz to 125 kHz
applications
power savings
LCD Driver and nanoWatt Technology
PIC16F913/914/916/917/946
Low-Power Features:
• Standby Current:
• Operating Current:
• Watchdog Timer Current:
Peripheral Features:
• Liquid Crystal Display module:
• Up to 24/35/53 I/O pins and 1 input-only pin:
• In-Circuit Serial Programming™ (ICSP™) via two
• Analog comparator module with:
• A/D Converter:
• Timer0: 8-bit timer/counter with 8-bit
• Enhanced Timer1:
• Timer2: 8-bit timer/counter with 8-bit period
• Addressable Universal Synchronous
• Up to 2 Capture, Compare, PWM modules:
• Synchronous Serial Port (SSP) with I
- <100 nA @ 2.0V, typical
- 11 μA @ 32 kHz, 2.0V, typical
- 220 μA @ 4 MHz, 2.0V, typical
- 1 μA @ 2.0V, typical
- Up to 60/96/168 pixel drive capability on
- Four commons
- High-current source/sink for direct LED drive
- Interrupt-on-change pin
- Individually programmable weak pull-ups
pins
- Two analog comparators
- Programmable on-chip voltage reference
- Comparator inputs and outputs externally
- 10-bit resolution and up to 8 channels
programmable prescaler
- 16-bit timer/counter with prescaler
- External Timer1 Gate (count enable)
- Option to use OSC1 and OSC2 as Timer1
register, prescaler and postscaler
Asynchronous Receiver Transmitter (AUSART)
- 16-bit Capture, max. resolution 12.5 ns
- 16-bit Compare, max. resolution 200 ns
- 10-bit PWM, max. frequency 20 kHz
28/40/64-pin devices, respectively
(CV
accessible
oscillator if INTOSCIO or LP mode is
selected
REF
) module (% of V
DD
)
DS41250F-page 1
2
C
™