PIC16F913-I/SP Microchip Technology, PIC16F913-I/SP Datasheet - Page 104

• Manufacturer Part Number: PIC16F913-I/SP
• Description: IC PIC MCU FLASH 4KX14 28DIP
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F913-I/SP

• Program Memory Type: FLASH
• Program Memory Size: 7KB (4K x 14)
• Package / Case: 28-DIP (0.300", 7.62mm)
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LCD, POR, PWM, WDT
• Number Of I /o: 24
• Eeprom Size: 256 x 8
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 5x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC16F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 256 B
• Interface Type: SSP/I2C/AUSART/SPI
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 24
• Number Of Timers: 3
• Operating Supply Voltage: 2 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, DV164120
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 5-ch x 10-bit
• Package: 28SPDIP
• Device Core: PIC
• Family Name: PIC16
• Maximum Speed: 20 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

PIC16F913/914/916/917/946
6.0
The Timer1 module is a 16-bit timer/counter with the
following features:
• 16-bit timer/counter register pair (TMR1H:TMR1L)
• Programmable internal or external clock source
• 3-bit prescaler
• Optional LP oscillator
• Synchronous or asynchronous operation
• Timer1 gate (count enable) via comparator or
• Interrupt on overflow
• Wake-up on overflow (external clock,
• Clock source for LCD module
Figure 6-1 is a block diagram of the Timer1 module.
FIGURE 6-1:
DS41250F-page 102
T1G pin
Asynchronous mode only)
OSC2/T1OSO
OSC1/T1OSI
F
F
TIMER1 MODULE WITH GATE
CONTROL
T1OSCEN
OSC
OSC
Note 1:
T1CKI
= 000
= x00
Set flag bit
TMR1IF on
Overflow
2:
3:
4:
ST Buffer is low power type when using LP oscillator, or high speed type when using T1CKI.
Timer1 register increments on rising edge.
Synchronize does not operate while in Sleep.
SYNCC2OUT is synchronized when the C2SYNC bit of the CMCON1 register is set.
TIMER1 BLOCK DIAGRAM
TMR1H
LP OSC
TMR1
(2)
TMR1L
(1)
EN
1
0
To LCD Module
TMR1CS
Internal
F
Clock
OSC
/4
6.1
The Timer1 module is a 16-bit incrementing counter
which is accessed through the TMR1H:TMR1L register
pair. Writes to TMR1H or TMR1L directly update the
counter.
When used with an internal clock source, the module is
a timer. When used with an external clock source, the
module can be used as either a timer or counter.
6.2
The TMR1CS bit of the T1CON register is used to select
the clock source. When TMR1CS = 0, the clock source
is F
supplied externally.
F
T1CKI pin
OSC
To C2 Comparator Module
Timer1 Clock
1
0
OSC
/4
/4. When TMR1CS = 1, the clock source is
Timer1 Operation
Clock Source Selection
T1CKPS<1:0>
T1SYNC
Clock Source
Prescaler
1, 2, 4, 8
SYNCC2OUT
TMR1ON
0
1
2
T1G
TMR1GE
© 2007 Microchip Technology Inc.
(4)
Synchronized
Synchronize
clock input
T1GSS
1
0
det
(3)
TMR1CS
T1GINV
0
1