PIC18LF2331-I/SO Microchip Technology, PIC18LF2331-I/SO Datasheet - Page 175

• Manufacturer Part Number: PIC18LF2331-I/SO
• Description: IC MCU FLASH 4KX16 28SOIC
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18LF2331-I/SO

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, Power Control PWM, QEI, POR, PWM, WDT
• Number Of I /o: 24
• Program Memory Size: 8KB (4K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 5x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-SOIC (7.5mm Width)
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

FIGURE 18-2:
FIGURE 18-3:
This module contains four duty cycle generators,
numbered 0 through 3. The module has eight PWM
output pins, numbered 0 through 7. The eight PWM
outputs are grouped into output pairs of even and odd
numbered outputs. In Complementary modes, the even
PWM pins must always be the complement of the
corresponding odd PWM pin. For example, PWM0 will
be the complement of PWM1, PWM2 will be the
complement of PWM3 and so on. The dead-time
 2010 Microchip Technology Inc.
Note:
Fault A Pin
Fault B Pin
Fault A Pin
Fault B Pin
In Complementary mode, the even channel cannot be forced active by a Fault or override event when the odd channel is active.
The even channel is always the complement of the odd channel and is inactive, with dead time inserted, before the odd channel
is driven to its active state.
PWM Duty Cycle Register
Duty Cycle Comparator
Channel Override Values
Fault Pin Assignment
Fault Override Values
PWM MODULE BLOCK DIAGRAM, ONE OUTPUT PAIR, COMPLEMENTARY MODE
PWM MODULE BLOCK DIAGRAM, ONE OUTPUT PAIR, INDEPENDENT MODE
Channel Override Values
PWM Duty Cycle Register
Duty Cycle Comparator
Fault Override Values
Fault Pin Assignment
Logic
Logic
PIC18F2331/2431/4331/4431
V
DD
Dead-Band
Generator
generator inserts an OFF period called “dead time”
between the going OFF of one pin to the going ON of
the complementary pin of the paired pins. This is to
prevent damage to the power switching devices that
will be connected to the PWM output pins.
The time base for the PWM module is provided by its
own 12-bit timer, which also incorporates selectable
prescaler and postscaler options.
V
V
DD
DD
HPOL
LPOL
HPOL
LPOL
DS39616D-page 175
PWM0
PWM1
PWM1
PWM0