PIC18F4520-I/P Microchip Technology, PIC18F4520-I/P Datasheet - Page 3

• Manufacturer Part Number: PIC18F4520-I/P
• Description: IC MCU FLASH 16KX16 40DIP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F4520-I/P

• Program Memory Type: FLASH
• Program Memory Size: 32KB (16K x 16)
• Package / Case: 40-DIP (0.600", 15.24mm)
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 36
• Eeprom Size: 256 x 8
• Ram Size: 1.5K x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 13x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 1536 B
• Interface Type: MSSP, SPI, I2C, PSP, USART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 36
• Number Of Timers: 1 x 8
• Operating Supply Voltage: 2 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, 53275-917, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, ICE4000, DV164136, DM163022
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 13 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DVA18XP400 - DEVICE ADAPTER 18F4220 PDIP 40LD444-1001 - DEMO BOARD FOR PICMICRO MCUACICE0206 - ADAPTER MPLABICE 40P 600 MIL
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

6. Module: ECCP
7. Module: ECCP
EXAMPLE 1:
8. Module: ECCP
© 2008 Microchip Technology Inc.
When the ECCP1 auto-shutdown feature is con-
figured for automatic restart by setting the PRSEN
bit (PWM1CON<7>), the pulse terminates immedi-
ately in a shutdown event. In addition, the pulse
may restart within the period if the shutdown
condition expires. This may result in the generation
of short pulses on the PWM output(s).
Work around
Configure the auto-shutdown for software restart
by clearing the PRSEN bit (PWM1CON<7>). The
PWM can be re-enabled by clearing the
ECCPASE bit (ECCP1AS<7>) after the shutdown
condition expires.
Date Codes that pertain to this issue:
All engineering and production devices.
When monitoring a shutdown condition using a bit
test on the ECCPASE bit (ECCP1AS<7>), or
performing a bit operation on the ECCPASE bit,
the device may produce unexpected results.
Work around
Before performing a bit test or bit operation on the
ECCPASE bit, copy the ECCP1AS register to the
working register and perform the operation there.
By avoiding these operations on the ECCPASE bit
in the ECCP1AS register, the module will operate
normally.
In Example 1, ECCPASE bit operations are
performed on the W register.
Date Codes that pertain to this issue:
All engineering and production devices.
The auto-shutdown source, FLT0, has inverse
polarity from the description in Section 16.4.7
“Enhanced PWM Auto-Shutdown” of the Device
Data Sheet. A logic high-voltage level on FLT0 will
generate a shutdown on ECCP1.
Work around
None.
Date Codes that pertain to this issue:
All engineering and production devices.
MOVF
BTFSC
BRA
ECCP1AS, W
WREG, ECCPASE
SHUTDOWN_ROUTINE
PIC18F2420/2520/4420/4520
9. Module: ECCP and CCP
10. Module: ECCP
11. Module: ECCP
The CCP1 and CCP2 configured for PWM mode,
with 1:1 Timer2 prescaler and duty cycle set to the
period minus 1, may result in the PWM output(s)
remaining at a logic low level.
Clearing the PR2 register to select the fastest
period may also result in the output(s) remaining at
a logic low output level.
Work around
To ensure a reliable waveform, verify that the
selected duty cycle does not equal the 10-bit
period minus 1 prior to writing these locations, or
use 1:4 or 1:16 Timer2 prescale. Also, verify the
PR2 register is not written to 00h.
All other duty cycle and period settings will function
as described in the Device Data Sheet.
The ECCP and CCP modules remain capable of
10-bit accuracy.
Date Codes that pertain to this issue:
All engineering and production devices.
ECCP1
Comparator 1 corrupts the PWM duty cycle pulse.
In addition, it does not always synchronize the
pulse to the beginning of the period and the end of
the pulse can occur at any time within the period.
Work around
Use FLT0 for the auto-shutdown source. Applica-
tions which can tolerate a shutdown response time
of several T
flag to detect a shutdown event and disable the
PWM
(ECCP1AS<7>).
Date Codes that pertain to this issue:
All engineering and production devices.
When the shutdown state of the PWM pin(s) is
configured to tri-state the outputs, the device may
consume higher than expected current during the
shutdown event.
Work around
Configure the PWM output for either a high or low
logic
PSSAC1:PSSAC0 (ECCP1AS<3:2>) and PSSBD1:
PSSBD0 (ECCP1AS<1:0>) bits. Clearing the auto-
shutdown event will return the device to normal
current consumption levels.
Date Codes that pertain to this issue:
All engineering and production devices.
state
by
configured
CY
s may use the comparator interrupt
during
clearing
for
the
the
auto-shutdown
shutdown
DS80209H-page 3
EECPASE
via
with
the
bit