PIC18C242-I/SO Microchip Technology, PIC18C242-I/SO Datasheet - Page 9

• Manufacturer Part Number: PIC18C242-I/SO
• Description: IC MCU OTP 8KX16 A/D 28SOIC
• Manufacturer: Microchip Technology
• Series: PIC® 18Cr

Specifications of PIC18C242-I/SO

• Core Size: 8-Bit
• Program Memory Size: 16KB (8K x 16)
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Core Processor: PIC
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Number Of I /o: 22
• Program Memory Type: OTP
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 5x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-SOIC (7.5mm Width)
• Controller Family/series: PIC18
• No. Of I/o's: 23
• Ram Memory Size: 512Byte
• Cpu Speed: 40MHz
• No. Of Timers: 4
• Processor Series: PIC18C
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 512 B
• Interface Type: MSSP, SPI, I2C, USART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 23
• Number Of Timers: 1 x 16 bit
• Operating Supply Voltage: 2.5 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: ICE2000, DM163022, DV164136
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 5 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT28SO-1 - SOCKET TRANSITION 28SOIC 300MILI3DB18C452 - BOARD DAUGHTER ICEPIC3309-1073 - ADAPTER 28-SOIC TO 28-SOIC309-1024 - ADAPTER 28-SOIC TO 28-DIP309-1023 - ADAPTER 28-SOIC TO 28-DIP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

6. Module: USART
EXAMPLE 1:
EXAMPLE 2:
 2002 Microchip Technology Inc.
movwf
nop
btfss
movwf
btfss
The operation of the USART Transmit Interrupt
flag bit TXIF (PIR1<4>) is clarified as follows:
TXIF is not cleared immediately upon loading data
into the transmit buffer TXREG. The flag bit
becomes valid in the second instruction cycle fol-
lowing the load instruction (see Example 1). Poll-
ing TXIF immediately following a load of TXREG
will give invalid results (Example 2).
This clarification applies to all USART transmis-
sion modes (master or slave, synchronous or
asynchronous, 8-bit or 9-bit).
TXREG
PIR1,TXIF
TXREG
PIR1,TXIF
CORRECTLY POLLING
THE TXIF BIT
POLLING THE TXIF BIT
IMMEDIATELY AFTER
LOADING THE TRANSMIT
BUFFER
;load the register
:first instruction--
;just a placeholder, it
;could be any instruction
;second instruction--
;now TXIF is valid
;load the register
;first instruction--
;reading TXIF now will
;give invalid results
PIC18CXX2
DS80058H-page 9