PIC24FJ128GA110-I/PT Microchip Technology, PIC24FJ128GA110-I/PT Datasheet - Page 31

• Manufacturer Part Number: PIC24FJ128GA110-I/PT
• Description: IC PIC MCU FLASH 100TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 24Fr

Specifications of PIC24FJ128GA110-I/PT

• Core Size: 16-Bit
• Program Memory Size: 128KB (43K x 24)
• Core Processor: PIC
• Speed: 32MHz
• Connectivity: I²C, PMP, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 85
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TFQFP
• Controller Family/series: PIC24
• No. Of I/o's: 85
• Ram Memory Size: 16KB
• Cpu Speed: 32MHz
• No. Of Timers: 5
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1004 - PIC24 BREAKOUT BOARDMA240015 - BOARD MCV PIM FOR 24F256GADM240011 - KIT STARTER MPLAB FOR PIC24F MCU
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

TABLE 4-2:
© 2007 Microchip Technology Inc.
WINDIS
WPCFG
WPDIS
WPEND
WPFP8:WPFP0
Note 1:
Bit Field
2:
Available on PIC24FJXXXGB1XX devices only.
Available on PIC24FJXXXGA110 devices only. On other devices, always maintain this bit as ‘1’.
PIC24FJXXXGA1/GB1 CONFIGURATION BITS DESCRIPTION (CONTINUED)
CW3<8:0>
CW3<14>
CW3<13>
CW3<15>
Register
CW1<6>
Windowed WDT bit
1 = Watchdog Timer in Non-Window mode
0 = Watchdog Timer in Window mode; FWDTEN must be ‘1’
Configuration Word Code Page Protection Select bit
1 = Last page (at the top of program memory) and Flash Configuration Words
0 = Last page and Flash Configuration Words are code-protected
Segment Write Protection Disable bit
1 = Segmented code protection disabled
0 = Segmented code protection enabled; protected segment defined by
Segment Write Protection End Page Select bit
1 = Protected code segment lower boundary is at the bottom of program
0 = Protected code segment upper boundary is at the last page of program
Protected Code Segment Boundary Page bits
Designates the 16K word program code page that is the boundary of the
protected code segment, starting with Page 0 at the bottom of program
memory
If WPEND = 1:
Last address of designated code page is the upper boundary of the segment
If WPEND = 0:
First address of designated code page is the lower boundary of the segment
are not protected
WPEND, WPCFG and WPFPx Configuration bits
memory (000000h); upper boundary is the code page specified by
WPFP8:WPFP0
memory; lower boundary is the code page specified by WPFP8:WPFP0
PIC24FJXXXGA1/GB1
Description
DS39907A-page 31