PIC16C77-04/P Microchip Technology, PIC16C77-04/P Datasheet - Page 78

• Manufacturer Part Number: PIC16C77-04/P
• Description: IC MCU OTP 8KX14 A/D PWM 40DIP
• Manufacturer: Microchip Technology
• Series: PIC® 16Cr

Specifications of PIC16C77-04/P

• Core Size: 8-Bit
• Program Memory Size: 14KB (8K x 14)
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Core Processor: PIC
• Speed: 4MHz
• Connectivity: I²C, SPI, UART/USART
• Number Of I /o: 33
• Program Memory Type: OTP
• Ram Size: 368 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 6 V
• Data Converters: A/D 8x8b
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 40-DIP (0.600", 15.24mm)
• Controller Family/series: PIC16C
• No. Of I/o's: 33
• Ram Memory Size: 368Byte
• Cpu Speed: 4MHz
• No. Of Timers: 3
• Processor Series: PIC16C
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 368 B
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 33
• Number Of Timers: 3
• Maximum Operating Temperature: + 70 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: ICE2000
• Minimum Operating Temperature: 0 C
• On-chip Adc: 8 bit, 8 Channel
• Data Rom Size: 368 B
• A/d Bit Size: 8 bit
• A/d Channels Available: 8
• Height: 4.95 mm
• Length: 53.21 mm
• Supply Voltage (max): 6 V
• Supply Voltage (min): 4 V
• Width: 14.73 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 444-1001 - DEMO BOARD FOR PICMICRO MCU
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

PIC16C7X
11.2
This section contains register definitions and opera-
tional characteristics of the SPI module for the
PIC16C72,
PIC16C74A.
FIGURE 11-1: SSPSTAT: SYNC SERIAL PORT STATUS REGISTER (ADDRESS 94h)
DS30390E-page 78
bit7
bit 7-6: Unimplemented: Read as '0'
bit 5:
bit 4:
bit 3:
bit 2:
bit 1:
bit 0:
U-0
—
SPI Mode for PIC16C72/73/73A/74/74A
D/A: Data/Address bit (I
1 = Indicates that the last byte received or transmitted was data
0 = Indicates that the last byte received or transmitted was address
P: Stop bit (I
1 = Indicates that a stop bit has been detected last (this bit is '0' on RESET)
0 = Stop bit was not detected last
S: Start bit (I
1 = Indicates that a start bit has been detected last (this bit is '0' on RESET)
0 = Start bit was not detected last
R/W: Read/Write bit information (I
This bit holds the R/W bit information following the last address match. This bit is valid from the address
match to the next start bit, stop bit, or ACK bit.
1 = Read
0 = Write
UA: Update Address (10-bit I
1 = Indicates that the user needs to update the address in the SSPADD register
0 = Address does not need to be updated
BF: Buffer Full Status bit
Receive (SPI and I
1 = Receive complete, SSPBUF is full
0 = Receive not complete, SSPBUF is empty
Transmit (I
1 = Transmit in progress, SSPBUF is full
0 = Transmit complete, SSPBUF is empty
U-0
PIC16C73,
—
D/A
2
R-0
C mode only)
2
2
C mode only. This bit is cleared when the SSP module is disabled, SSPEN is cleared)
C mode only. This bit is cleared when the SSP module is disabled, SSPEN is cleared)
PIC16C73A,
2
C modes)
R-0
P
2
C mode only)
2
C mode only)
R-0
PIC16C74,
S
72 73 73A 74 74A 76 77
Applicable Devices
2
C mode only)
R/W
R-0
R-0
UA
R-0
BF
bit0
R = Readable bit
W = Writable bit
U = Unimplemented bit,
- n =Value at POR reset
1997 Microchip Technology Inc.
read as ‘0’